ntlm_auth
1
Samba
User Commands
3.5
ntlm_auth
tool to allow external access to Winbind's NTLM authentication function
ntlm_auth
-d debuglevel
-l logdir
-s <smb config file>
DESCRIPTION
This tool is part of the samba
7 suite.
ntlm_auth is a helper utility that authenticates
users using NT/LM authentication. It returns 0 if the users is authenticated
successfully and 1 if access was denied. ntlm_auth uses winbind to access
the user and authentication data for a domain. This utility
is only intended to be used by other programs (currently
Squid
and mod_ntlm_winbind)
OPERATIONAL REQUIREMENTS
The winbindd
8 daemon must be operational
for many of these commands to function.
Some of these commands also require access to the directory
winbindd_privileged in
$LOCKDIR. This should be done either by running
this command as root or providing group access
to the winbindd_privileged directory. For
security reasons, this directory should not be world-accessable.
OPTIONS
--helper-protocol=PROTO
Operate as a stdio-based helper. Valid helper protocols are:
squid-2.4-basic
Server-side helper for use with Squid 2.4's basic (plaintext)
authentication.
squid-2.5-basic
Server-side helper for use with Squid 2.5's basic (plaintext)
authentication.
squid-2.5-ntlmssp
Server-side helper for use with Squid 2.5's NTLMSSP
authentication.
Requires access to the directory
winbindd_privileged in
$LOCKDIR. The protocol used is
described here: http://devel.squid-cache.org/ntlm/squid_helper_protocol.html.
This protocol has been extended to allow the
NTLMSSP Negotiate packet to be included as an argument
to the YR command. (Thus avoiding
loss of information in the protocol exchange).
ntlmssp-client-1
Client-side helper for use with arbitrary external
programs that may wish to use Samba's NTLMSSP
authentication knowledge.
This helper is a client, and as such may be run by any
user. The protocol used is
effectively the reverse of the previous protocol. A
YR command (without any arguments)
starts the authentication exchange.
gss-spnego
Server-side helper that implements GSS-SPNEGO. This
uses a protocol that is almost the same as
squid-2.5-ntlmssp, but has some
subtle differences that are undocumented outside the
source at this stage.
Requires access to the directory
winbindd_privileged in
$LOCKDIR.
gss-spnego-client
Client-side helper that implements GSS-SPNEGO. This
also uses a protocol similar to the above helpers, but
is currently undocumented.
ntlm-server-1
Server-side helper protocol, intended for use by a
RADIUS server or the 'winbind' plugin for pppd, for
the provision of MSCHAP and MSCHAPv2 authentication.
This protocol consists of lines in the form:
Parameter: value and Parameter::
Base64-encode value. The presence of a single
period . indicates that one side has
finished supplying data to the other. (Which in turn
could cause the helper to authenticate the
user).
Curently implemented parameters from the
external program to the helper are:
Username
The username, expected to be in
Samba's .
Username: bob
Username:: Ym9i
NT-Domain
The user's domain, expected to be in
Samba's .
NT-Domain: WORKGROUP
NT-Domain:: V09SS0dST1VQ
Full-Username
The fully qualified username, expected to be in
Samba's and qualified with the
.
Full-Username: WORKGROUP\bob
Full-Username:: V09SS0dST1VQYm9i
LANMAN-Challenge
The 8 byte LANMAN Challenge value,
generated randomly by the server, or (in cases such as
MSCHAPv2) generated in some way by both the server and
the client.
LANMAN-Challege: 0102030405060708
LANMAN-Response
The 24 byte LANMAN Response value,
calculated from the user's password and the supplied
LANMAN Challenge. Typically, this
is provided over the network by a client wishing to authenticate.
LANMAN-Response: 0102030405060708090A0B0C0D0E0F101112131415161718
NT-Response
The >= 24 byte NT Response
calculated from the user's password and the supplied
LANMAN Challenge. Typically, this is
provided over the network by a client wishing to authenticate.
NT-Response: 0102030405060708090A0B0C0D0E0F101112131415161718
Password
The user's password. This would be
provided by a network client, if the helper is being
used in a legacy situation that exposes plaintext
passwords in this way.
Password: samba2
Password:: c2FtYmEy
Request-User-Session-Key
Apon sucessful authenticaiton, return
the user session key associated with the login.
Request-User-Session-Key: Yes
Request-LanMan-Session-Key
Apon sucessful authenticaiton, return
the LANMAN session key associated with the login.
Request-LanMan-Session-Key: Yes
Implementors should take care to base64 encode
any data (such as usernames/passwords) that may contain malicous user data, such as
a newline. They may also need to decode strings from
the helper, which likewise may have been base64 encoded.
--username=USERNAME
Specify username of user to authenticate
--domain=DOMAIN
Specify domain of user to authenticate
--workstation=WORKSTATION
Specify the workstation the user authenticated from
--challenge=STRING
NTLM challenge (in HEXADECIMAL)
--lm-response=RESPONSE
LM Response to the challenge (in HEXADECIMAL)
--nt-response=RESPONSE
NT or NTLMv2 Response to the challenge (in HEXADECIMAL)
--password=PASSWORD
User's plaintext passwordIf
not specified on the command line, this is prompted for when
required.
For the NTLMSSP based server roles, this parameter
specifies the expected password, allowing testing without
winbindd operational.
--request-lm-key
Retreive LM session key
--request-nt-key
Request NT key
--diagnostics
Perform Diagnostics on the authentication
chain. Uses the password from --password
or prompts for one.
--require-membership-of={SID|Name}
Require that a user be a member of specified
group (either name or SID) for authentication to succeed.
&stdarg.server.debug;
&popt.common.samba;
&stdarg.help;
EXAMPLE SETUP
To setup ntlm_auth for use by squid 2.5, with both basic and
NTLMSSP authentication, the following
should be placed in the squid.conf file.
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
auth_param basic children 5
auth_param basic realm Squid proxy-caching web server
auth_param basic credentialsttl 2 hours
This example assumes that ntlm_auth has been installed into your
path, and that the group permissions on
winbindd_privileged are as described above.
To setup ntlm_auth for use by squid 2.5 with group limitation in addition to the above
example, the following should be added to the squid.conf file.
auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUP\Domain Users'
auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUP\Domain Users'
TROUBLESHOOTING
If you're experiencing problems with authenticating Internet Explorer running
under MS Windows 9X or Millenium Edition against ntlm_auth's NTLMSSP authentication
helper (--helper-protocol=squid-2.5-ntlmssp), then please read
the Microsoft Knowledge Base article #239869 and follow instructions described there.
VERSION
This man page is correct for version 3 of the Samba
suite.
AUTHOR
The original Samba software and related utilities
were created by Andrew Tridgell. Samba is now developed
by the Samba Team as an Open Source project similar
to the way the Linux kernel is developed.
The ntlm_auth manpage was written by Jelmer Vernooij and
Andrew Bartlett.