iokit/IOKit/IODMACommand.h

184     @param numAddressBits Number of bits that the hardware uses on its internal address bus. Typically 32 but may be more on modern hardware.  A 0 implies no-restriction other than that implied by the output segment function.
186     @param mappingOptions is the type of mapping that is required to translate an IOMemoryDescriptor into the desired number of bits.  For instance if your hardware only supports 32 bits but must run on machines with > 4G of RAM some mapping will be required.  Number of bits will be specified in numAddressBits, see below.This parameter can take 3 values:- kNonCoherent - used for non-coherent hardware transfers, Mapped - Validate that all I/O bus generated addresses are within the number of addressing bits specified, Bypassed indicates that bypassed addressing is required, this is used when the hardware transferes are into coherent memory but no mapping is required.  See also prepare() for failure cases.
194 			  UInt8            numAddressBits,
207     @param numAddressBits Number of bits that the hardware uses on its internal address bus. Typically 32 but may be more on modern hardware.  A 0 implies no-restriction other than that implied by the output segment function.
209     @param mapType is the type of mapping that is required to translate an IOMemoryDescriptor into the desired number of bits.  For instance if your hardware only supports 32 bits but must run on machines with > 4G of RAM some mapping will be required.  Number of bits will be specified in numAddressBits, see below.  This parameter can take 3 values:- kNonCoherent - used for non-coherent hardware transfers, Mapped - Validate that all I/O bus generated addresses are within the number of addressing bits specified, Bypassed indicates that bypassed addressing is required, this is used when the hardware transfers are into coherent memory but no mapping is required.  See also prepare() for failure cases.
223 	     UInt8           numAddressBits,
242     @param numAddressBits Number of bits that the hardware uses on its internal address bus. Typically 32 but may be more on modern hardware.  A 0 implies no-restriction other than that implied by the output segment function.
244     @param mappingOptions is the type of mapping that is required to translate an IOMemoryDescriptor into the desired number of bits.  For instance if your hardware only supports 32 bits but must run on machines with > 4G of RAM some mapping will be required.  Number of bits will be specified in numAddressBits, see below.This parameter can take 3 values:- kNonCoherent - used for non-coherent hardware transfers, Mapped - Validate that all I/O bus generated addresses are within the number of addressing bits specified, Bypassed indicates that bypassed addressing is required, this is used when the hardware transferes are into coherent memory but no mapping is required.  See also prepare() for failure cases.
251 					UInt8     numAddressBits,
406     @param numAddressBits Number of bits that the hardware uses on its internal address bus. Typically 32 but may be more on modern hardware.  A 0 implies no-restriction other than that implied by the output segment function.
408     @param mappingOptions is the type of mapping that is required to translate an IOMemoryDescriptor into the desired number of bits.  For instance if your hardware only supports 32 bits but must run on machines with > 4G of RAM some mapping will be required.  Number of bits will be specified in numAddressBits, see below.This parameter can take 3 values:- kNonCoherent - used for non-coherent hardware transfers, Mapped - Validate that all I/O bus generated addresses are within the number of addressing bits specified, Bypassed indicates that bypassed addressing is required, this is used when the hardware transferes are into coherent memory but no mapping is required.  See also prepare() for failure cases.
420 					      UInt8		numAddressBits,
524 		      UInt8     numAddressBits,
543 			      numAddressBits, maxSegmentSize, mapType,