Lines Matching refs:is
5 embedded system, it is often used to access dial-up modems over serial lines.
16 Once the physical interface is attached, the access to the remote access point gateway
20 When the interface is configured, the connection may be established using
37 A new pico\_device is allocated and returned if the device is successfully created.
49 to the read functionality of the PPP driver. Setting up a proper read/write interface is necessary
66 0 returned if the serial read function is successfully associated.
82 to the write functionality of the PPP driver. Setting up a proper read/write interface is necessary
99 0 returned if the serial write function is successfully associated.
117 Calling this function is not mandatory for the PPP UART interface to work.
131 0 returned if the serial set\_speed function is successfully associated.
160 0 returned if the APN is correctly configured.
182 0 returned if the username is successfully configured.
204 0 returned if the password is successfully configured.
215 required at all levels. If the connection is dropped, the system will try to reconnect by restarting
216 the handshakes, until \texttt{pico\_ppp\_disconnect} is finally called.
228 0 returned if the device is successfully connecting.
250 0 returned if the device is successfully put in disconnected state.