Lines Matching refs:interrupt
168 - The host controller processes one interrupt endpoint descriptor list every
170 index into an array of 32 interrupt endpoint descriptor lists or periodic
173 sets up the interrupt lists to visit any given endpoint descriptor in as
174 many lists as necessary to provide the interrupt granularity required for
177 - Isochronous endpoint descriptors are added at the end of 1ms interrupt
189 allocate bandwidth needed for an interrupt or isochronous endpoint as
314 This field is used for for high, full and low speed usb device interrupt
316 frame of a given usb frame to initiate a high speed interrupt and
349 This field is used only for full/low speed usb device interrupt and
383 - The host controller processes one interrupt endpoint descriptor list every
386 - The host controller driver sets up the interrupt lists to visit any given
387 endpoint descriptor in as many lists as necessary to provide the interrupt
419 For a given high speed interrupt or isochronous endpoint, the EHCI host
431 interrupt list path based on a millisecond value. For example, an endpoint
432 with a polling interval of 16us will map to an interrupt list path of 2ms.
459 For a given full/low speed interrupt or isochronous endpoint, we need both