Lines Matching refs:read
284 * @reg_addr: 32 bit address of PHY register to read
285 * @phy_data: Pointer to read data from PHY register
338 * Address cycle complete, setup and write the read
363 DEBUGOUT("PHY read command didn't complete\n");
409 * Put the data in the MDI single read and write data register
879 ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
885 ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
898 hw->eeprom.ops.read(hw, data_offset++, &phy_offset);
900 hw->eeprom.ops.read(hw, data_offset, &eword);
1197 hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
1209 hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
1214 hw->eeprom.ops.read(hw, *list_offset, data_offset);
1223 if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
1239 * @byte_offset: EEPROM byte offset to read
1240 * @eeprom_data: value read
1242 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1274 * @byte_offset: byte offset to read
1275 * @data: value read
1277 * Performs byte read operation to SFP module's EEPROM over I2C interface at
1324 /* Device Address and read indication */
1350 DEBUGOUT("I2C byte read error - Retrying.\n");
1352 DEBUGOUT("I2C byte read error.\n");
1608 * @data: read data value