fibre-channel/impl/fp.c

1377  * or removed) which will be reflected in the map the ULPs will see.
2934 			    "LILP map Invalid or not present");
2943 			    "LILP map length zero");
3919  * Get an Arbitrated Loop map from the underlying FCA
3926 	FP_TRACE(FP_NHEAD1(1, 0), "fp_get_lilpmap Begin; port=%p, map=%p",
3941 		 * Since the map length is zero, provide all
3967 			    "FCA reset failed after LILP map was found"
3977 	FP_TRACE(FP_NHEAD1(1, 0), "fp_get_lilpmap End; port=%p, map=%p", port,
10509 	 * LILP map order. The HBA firmware usually returns the device
10510 	 * map in the LILP map order and diagnostic applications would
10520 	 * the host adapter's alpa also shows up in the lilp map. We
10915 	 *    fp_validate_rscn_page()), it passes this count in the map
12501  * Fill out old map for ULPs with fp_mutex, fd_mutex and pd_mutex held
12504 fp_fillout_old_map_held(fc_portmap_t *map, fc_remote_port_t *pd, uchar_t flag)
12533 	fctl_copy_portmap_held(map, pd);
12534 	map->map_pd = pd;
12538  * Fill out old map for ULPs
12541 fp_fillout_old_map(fc_portmap_t *map, fc_remote_port_t *pd, uchar_t flag)
12573 	fctl_copy_portmap(map, pd);
12574 	map->map_pd = pd;
12582 fp_fillout_changed_map(fc_portmap_t *map, fc_remote_port_t *pd,
12596 	fctl_copy_portmap(map, pd);
12604  * Fillout New Name Server map
13268 				fc_portmap_t *map;
13270 				map = ((fc_portmap_t *)
13275 				 * First fill it like any new map
13280 				    map, gan_resp, d_id.port_id);
13282 					fctl_copy_portmap(map, pd);
13284 					map->map_state = PORT_DEVICE_INVALID;
13285 					map->map_type = PORT_DEVICE_NOCHANGE;
13628  * Get name server map
13631 fp_ns_getmap(fc_local_port_t *port, job_request_t *job, fc_portmap_t **map,
13645 	ns_cmd->ns_data_len = sizeof (**map) * (*len);
13646 	ns_cmd->ns_data_buf = (caddr_t)*map;
14223 	 * port map.
14579 				struct fc_portmap *map =
14585 				map->map_flags |=
14906  * Sanity check the LILP map returned by FCA