Lines Matching refs:out

88 		goto out;
125 goto out;
132 goto out;
139 goto out;
145 goto out;
150 goto out;
153 out:
293 goto out;
299 out:
345 goto out;
351 out:
392 goto out;
397 out:
494 DEBUGOUT1("PHY Address %d is out of range\n", offset);
496 goto out;
510 * of an MII read instruction consists of a shift out of 14 bits and
524 * Now that we've shifted out the read command to the MII, we need to
530 out:
551 DEBUGOUT1("PHY Address %d is out of range\n", offset);
553 goto out;
558 * out to the PHY. We first send a preamble to the PHY to signal the
578 out:
626 * @count: number of bits to shift out
628 * We need to shift 'count' bits out to the PHY. So, the value in the
629 * "data" parameter will be shifted out to the PHY one bit at a time.
639 * We need to shift "count" number of bits out to the PHY. So, the
640 * value in the "data" parameter will be shifted out to the PHY one
654 * A "1" is shifted out to the PHY by setting the MDIO bit to
656 * A "0" is shifted out to the PHY by setting the MDIO bit to
682 * the PHY (setting the MDC bit), and then reading the value of the data out
716 * out the last bit of the Register Address.
754 goto out;
760 out:
781 goto out;
789 goto out;
792 goto out;
796 goto out;
799 * This loop will early-out if the NO link condition has been met.
810 goto out;
814 goto out;
828 goto out;
832 goto out;
836 goto out;
840 goto out;
844 goto out;
852 goto out;
854 out:
864 * has been accomplished, clear the PHY_RESET_DIR bit to take the PHY out
887 /* ...then take it out of reset. */
982 /* Zero out the Multicast HASH table */
1049 goto out;
1058 out:
1084 * PHY to take it out of reset.
1091 goto out;
1101 goto out;
1110 goto out;
1120 goto out;
1133 goto out;
1144 goto out;
1152 out:
1173 /* Take the link out of reset */
1180 goto out;
1200 out:
1228 goto out;
1233 goto out;
1236 goto out; /* No link detected */
1264 goto out;
1282 goto out;
1343 out:
1382 goto out;
1398 goto out;
1414 out:
1435 goto out;
1448 goto out;
1467 out: