Lines Matching refs:dispclk
1079 /*the dispclk required is the maximum for all surfaces of the maximum of the source pixels for first output pixel times the throughput factor, divided by the pixels per dispclk, and divided by the minimum latency hiding minus the dram speed/p-state change latency minus the burst time, and the source pixels for last output pixel, times the throughput factor, divided by the pixels per dispclk, and divided by the minimum latency hiding minus the dram speed/p-state change latency minus the burst time, plus the active time.*/
1276 /*for cpu p-state change to be possible for a yclk(pclk) and sclk level the dispclk required has to be enough for the blackout duration*/
1277 /*for cpu c-state change to be possible for a yclk(pclk) and sclk level the dispclk required has to be enough for the blackout duration and recovery*/
1282 /* recovery time > (display bw * blackout duration + (2 * urgent latency + dmif burst time)*dispclk - dmif size )*/
1283 /* / (dispclk - display bw)*/
1370 /*for dram speed/p-state change to be possible for a yclk(pclk) and sclk level there has to be positive margin and the dispclk required has to be*/
1650 /*dispclk*/
1651 /*if dispclk is set to the maximum, ramping is not required. dispclk required without ramping is less than the dispclk required with ramping.*/
1652 /*if dispclk required without ramping is more than the maximum dispclk, that is the dispclk required, and the mode is not supported*/
1653 /*if that does not happen, but dispclk required with ramping is more than the maximum dispclk, dispclk required is just the maximum dispclk*/
1654 /*if that does not happen either, dispclk required is the dispclk required with ramping.*/
1655 /*dispclk required without ramping is the maximum of the one required for display pipe pixel throughput, for scaler throughput, for total read request thrrougput and for dram/np p-state change if enabled.*/
1656 /*the display pipe pixel throughput is the maximum of lines in per line out in the beginning of the frame and lines in per line out in the middle of the frame multiplied by the horizontal blank and chunk granularity factor, altogether multiplied by the ratio of the source width to the line time, divided by the line buffer pixels per dispclk throughput, and multiplied by the display pipe throughput factor.*/
1658 /*the dispclk required for scaler throughput is the product of the pixel rate and the scaling limits factor.*/
1659 /*the dispclk required for total read request throughput is the product of the peak request-per-second bandwidth and the dispclk cycles per request, divided by the request efficiency.*/
1660 /*for the dispclk required with ramping, instead of multiplying just the pipe throughput by the display pipe throughput factor, we multiply the scaler and pipe throughput by the ramping factor.*/
1753 data->dispclk = data->total_dispclk_required_with_ramping_with_request_bandwidth;
1756 data->dispclk = vbios->high_voltage_max_dispclk;
1759 data->dispclk = data->total_dispclk_required_without_ramping_with_request_bandwidth;
1762 /* the core voltage required is low if sclk, yclk(pclk)and dispclk are within the low limits*/
1763 /* otherwise, the core voltage required is medium if yclk (pclk) is within the low limit and sclk and dispclk are within the medium limit*/
1772 else if (bw_equ(bw_int_to_fixed(yclk_message), vbios->low_yclk) && sclk_message == bw_def_low && bw_ltn(data->dispclk, vbios->low_voltage_max_dispclk)) {
1775 else if ((bw_equ(bw_int_to_fixed(yclk_message), vbios->low_yclk) || bw_equ(bw_int_to_fixed(yclk_message), vbios->mid_yclk)) && (sclk_message == bw_def_low || sclk_message == bw_def_mid) && bw_ltn(data->dispclk, vbios->mid_voltage_max_dispclk)) {
1778 else if ((bw_equ(bw_int_to_fixed(yclk_message), vbios->low_yclk) || bw_equ(bw_int_to_fixed(yclk_message), vbios->mid_yclk) || bw_equ(bw_int_to_fixed(yclk_message), vbios->high_yclk)) && (sclk_message == bw_def_low || sclk_message == bw_def_mid || sclk_message == bw_def_high) && bw_leq(data->dispclk, vbios->high_voltage_max_dispclk)) {
1805 data->blackout_recovery_time = bw_max2(data->blackout_recovery_time, bw_div((bw_add(bw_mul(bw_div(bw_mul(data->display_bandwidth[k], data->useful_bytes_per_request[k]), data->bytes_per_request[k]), vbios->blackout_duration), bw_sub(bw_div(bw_mul(bw_mul(bw_mul((bw_add(bw_mul(bw_int_to_fixed(2), data->total_dmifmc_urgent_latency), data->dmif_burst_time[data->y_clk_level][data->sclk_level])), data->dispclk), bw_int_to_fixed(data->bytes_per_pixel[k])), data->lines_interleaved_in_mem_access[k]), data->latency_hiding_lines[k]), data->adjusted_data_buffer_size[k]))), (bw_sub(bw_div(bw_mul(bw_mul(data->dispclk, bw_int_to_fixed(data->bytes_per_pixel[k])), data->lines_interleaved_in_mem_access[k]), data->latency_hiding_lines[k]), bw_div(bw_mul(data->display_bandwidth[k], data->useful_bytes_per_request[k]), data->bytes_per_request[k])))));
1811 data->blackout_recovery_time = bw_max2(data->blackout_recovery_time, bw_div((bw_add(bw_mul(bw_div(bw_mul(data->display_bandwidth[k], data->useful_bytes_per_request[k]), data->bytes_per_request[k]), vbios->blackout_duration), bw_sub(bw_div(bw_mul(bw_mul(bw_mul((bw_add(bw_add(bw_mul(bw_int_to_fixed(2), vbios->mcifwrmc_urgent_latency), data->dmif_burst_time[data->y_clk_level][data->sclk_level]), data->mcifwr_burst_time[data->y_clk_level][data->sclk_level])), data->dispclk), bw_int_to_fixed(data->bytes_per_pixel[k])), data->lines_interleaved_in_mem_access[k]), data->latency_hiding_lines[k]), data->adjusted_data_buffer_size[k]))), (bw_sub(bw_div(bw_mul(bw_mul(data->dispclk, bw_int_to_fixed(data->bytes_per_pixel[k])), data->lines_interleaved_in_mem_access[k]), data->latency_hiding_lines[k]), bw_div(bw_mul(data->display_bandwidth[k], data->useful_bytes_per_request[k]), data->bytes_per_request[k])))));
1817 /*during self-refresh, sclk can be reduced to dispclk divided by the minimum pixels in the data fifo entry, with 15% margin, but shoudl not be set to less than the request bandwidth.*/
1846 data->sclk_deep_sleep = bw_max2(bw_div(bw_mul(data->dispclk, bw_frc_to_fixed(115, 100)), data->min_pixels_per_data_fifo_entry), data->total_read_request_bandwidth);
1858 data->chunk_request_time = bw_add(data->chunk_request_time, (bw_div((bw_div(bw_int_to_fixed(pixels_per_chunk * data->bytes_per_pixel[i]), data->useful_bytes_per_request[i])), bw_min2(sclk[data->sclk_level], bw_div(data->dispclk, bw_int_to_fixed(2))))));
1865 data->line_source_pixels_transfer_time = bw_max2(bw_div(bw_div(data->src_pixels_for_first_output_pixel[i], dceip->lb_write_pixels_per_dispclk), (bw_div(data->dispclk, dceip->display_pipe_throughput_factor))), bw_sub(bw_div(bw_div(data->src_pixels_for_last_output_pixel[i], dceip->lb_write_pixels_per_dispclk), (bw_div(data->dispclk, dceip->display_pipe_throughput_factor))), data->active_time[i]));
3094 bw_fixed_to_int(bw_mul(data->dispclk,