Lines Matching refs:LOGNAME
64 # define LOGNAME "msnd_classic"
70 # define LOGNAME "msnd_pinnacle"
687 printk(KERN_DEBUG LOGNAME ": Stopping read for %p\n", file);
699 printk(KERN_DEBUG LOGNAME ": Stopping write for %p\n", file);
720 printk(KERN_DEBUG LOGNAME ": Starting write for %p\n", file);
731 printk(KERN_DEBUG LOGNAME ": Starting read for %p\n", file);
1063 /* printk(KERN_DEBUG LOGNAME ": Play underflow\n"); */
1068 /* printk(KERN_DEBUG LOGNAME ": Record overflow\n"); */
1073 /* printk(KERN_DEBUG LOGNAME ": DSP message %d 0x%02x\n",
1085 /* printk(KERN_DEBUG LOGNAME ": HIMT message %d 0x%02x\n", HIBYTE(wMessage), HIBYTE(wMessage)); */
1134 printk(KERN_ERR LOGNAME ": Cannot reset DSP\n");
1148 printk(KERN_ERR LOGNAME ": I/O port conflict\n");
1159 printk(KERN_INFO LOGNAME ": %s, "
1182 printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, "
1284 printk(KERN_WARNING LOGNAME ": ADC calibration failed\n");
1295 printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE);
1301 printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE);
1308 printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
1312 printk(KERN_INFO LOGNAME ": DSP firmware uploaded (resident)\n");
1314 printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
1346 printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n");
1354 printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n");
1362 printk(KERN_DEBUG LOGNAME ": DSP reset timeout\n");
1380 printk(KERN_INFO LOGNAME ": DSP reset\n");
1383 printk(KERN_WARNING LOGNAME ": DSP reset failed\n");
1396 printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", dev.irq);
1408 printk(KERN_ERR LOGNAME ": Unable to register MultiSound\n");
1415 printk(KERN_ERR LOGNAME ": Unable to register DSP operations\n");
1423 printk(KERN_ERR LOGNAME ": Unable to register mixer operations\n");
1460 printk(KERN_ERR LOGNAME ": msnd_write_cfg: I/O error\n");
1554 printk(KERN_INFO LOGNAME ": Resetting all devices\n");
1571 printk(KERN_INFO LOGNAME
1578 printk(KERN_INFO LOGNAME
1585 printk(KERN_INFO LOGNAME
1735 printk(KERN_INFO LOGNAME ": Turtle Beach " LONGNAME " Linux Driver Version "
1739 printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n");
1751 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set to 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x290, or 0x3E0\n");
1759 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must within the range 0x100 to 0x3E0 and must be evenly divisible by 0x10\n");
1771 printk(KERN_ERR LOGNAME ": \"irq\" - must be set to 5, 7, 9, 10, 11 or 12\n");
1782 printk(KERN_ERR LOGNAME ": \"mem\" - must be set to "
1807 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
1809 printk(KERN_INFO LOGNAME ": Config port must be 0x250, 0x260 or 0x270 (or unspecified for PnP mode)\n");
1812 printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%x\n", cfg);
1834 printk(KERN_ERR LOGNAME ": Config port 0x%x conflict\n", cfg);
1839 printk(KERN_ERR LOGNAME ": Device configuration error\n");
1884 printk(KERN_INFO LOGNAME ": %u byte audio FIFOs (x2)\n", dev.fifosize);
1886 printk(KERN_ERR LOGNAME ": Couldn't allocate write FIFO\n");
1891 printk(KERN_ERR LOGNAME ": Couldn't allocate read FIFO\n");
1897 printk(KERN_ERR LOGNAME ": Probe failed\n");
1904 printk(KERN_ERR LOGNAME ": Attach failed\n");