Lines Matching refs:serial_outp
155 #define serial_outp(up, offset, value) serial_out(up, offset, value)
182 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
202 serial_outp(up, UART_RSA_FRR, 0);
225 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
383 serial_outp(up, UART_TX, up->port.x_char);
605 serial_outp(up, UART_LCR, 0xBF);
606 serial_outp(up, UART_EFR, UART_EFR_ECB);
607 serial_outp(up, UART_IER, 0);
608 serial_outp(up, UART_LCR, 0);
610 serial_outp(up, UART_LCR, 0xBF);
611 serial_outp(up, UART_EFR, UART_EFR_ECB);
612 serial_outp(up, UART_LCR, 0);
628 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
629 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
631 serial_outp(up, UART_FCR, 0);
668 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
683 serial_outp(up, UART_IER, up->ier);
715 serial_outp(up, UART_IER, 0);
732 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
735 serial_outp(up, UART_FCR, 0);
853 serial_outp(up, UART_LCR, 0xBF);
854 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
856 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
857 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
858 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
860 serial_outp(up, UART_FCR, fcr); /* set fcr */
861 serial_outp(up, UART_LCR, cval); /* reset DLAB */
866 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
868 serial_outp(up, UART_FCR, fcr); /* set fcr */
1031 serial_outp(up, UART_IER, 0);
1036 serial_outp(up, UART_IER, 0x0f);
1041 serial_outp(up, UART_IER, scratch);
1059 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1061 serial_outp(up, UART_MCR, save_mcr);
1065 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1066 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1067 serial_outp(up, UART_LCR, 0);
1068 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1086 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1090 serial_outp(up, UART_LCR, 0xBF);
1097 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1098 serial_outp(up, UART_FCR,
1108 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1109 serial_outp(up, UART_LCR, 0);
1110 serial_outp(up, UART_FCR,
1116 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1118 serial_outp(up, UART_LCR, save_lcr);
1121 serial_outp(up, UART_SCR, 0xa5);
1123 serial_outp(up, UART_SCR, 0x5a);
1125 serial_outp(up, UART_SCR, scratch);
1142 serial_outp(up, UART_RSA_FRR, 0);
1144 serial_outp(up, UART_MCR, save_mcr);
1145 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1148 serial_outp(up, UART_FCR, 0);
1150 serial_outp(up, UART_IER, 0);