Lines Matching refs:fdomain
0 /* fdomain.c -- Future Domain TMC-16x0 SCSI driver
37 fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]
291 #include "fdomain.h"
409 insmod fdomain fdomain=0x140,11 */
410 static char * fdomain = NULL;
411 module_param(fdomain, charp, 0);
511 printk(KERN_INFO "scsi%d: <fdomain> No BIOS; using scsi id %d\n",
514 printk(KERN_INFO "scsi%d: <fdomain> BIOS version ", shpnt->host_no);
530 printk(KERN_INFO "scsi%d: <fdomain> %s chip at 0x%x irq ",
550 printk(KERN_INFO "scsi: <fdomain> Usage: fdomain=<PORT_BASE>,<IRQ>[,<ADAPTER_ID>]\n");
551 printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
564 __setup("fdomain=", fdomain_setup);
655 printk("scsi: <fdomain> Options = %x\n", options);
676 printk( "scsi: <fdomain> fdomain_isa_detect:" );
731 if (!request_region(base, 0x10, "fdomain"))
763 if (!request_region(base, 0x10, "fdomain")) {
809 printk( "scsi: <fdomain> INFO: use lspci -v to see list of PCI devices\n" );
810 printk( "scsi: <fdomain> TMC-3260 detect:"
822 printk( "scsi: <fdomain> TMC-3260 detect:"
835 if (!request_region( pci_base, 0x10, "fdomain" ))
846 printk( "scsi: <fdomain> TMC-3260 detect:"
851 printk(KERN_ERR "scsi: <fdomain> PCI card detected, but driver not loaded (invalid port)\n" );
879 printk( "scsi: <fdomain> No BIOS, using port_base = 0x%x, irq = %d\n",
882 if (!request_region(port_base, 0x10, "fdomain")) {
883 printk( "scsi: <fdomain> port 0x%x is busy\n", port_base );
884 printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
888 printk( "scsi: <fdomain> Cannot locate chip at port base 0x%x\n",
890 printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
906 printk( "scsi: <fdomain> Detection failed (no card)\n" );
915 printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", port_base);
917 printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
950 printk(KERN_ERR "scsi: <fdomain> Card Detected, but driver not loaded (no IRQ)\n" );
956 do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt);
960 printk(KERN_ERR "scsi: <fdomain> IRQ %d is bad!\n", interrupt_level );
964 printk(KERN_ERR "scsi: <fdomain> IRQ %d is already in use!\n", interrupt_level );
967 printk(KERN_ERR "scsi: <fdomain> Error getting IRQ %d\n", interrupt_level );
971 printk(KERN_ERR "scsi: <fdomain> Detected, but driver not loaded (IRQ)\n" );
984 if (fdomain)
985 fdomain_setup(fdomain);
1046 printk( "scsi: <fdomain> Selection failed\n" );
1061 else panic( "scsi: <fdomain> current_SC->scsi_done() == NULL" );
1063 panic( "scsi: <fdomain> my_done() called outside of command\n" );
1102 printk( "scsi: <fdomain> Interrupt after abort, ignoring\n" );
1202 printk( "scsi: <fdomain> target = %d, command = %x, status = %x\n",
1220 printk( "scsi: <fdomain> message = %x\n",
1333 printk( "scsi: <fdomain> REQUEST SENSE"
1368 panic( "scsi: <fdomain> fdomain_16x0_queue() NOT REENTRANT!\n" );
1424 printk(KERN_WARNING "scsi: <fdomain> Cannot provide detailed information\n");
1491 printk( "scsi: <fdomain> abort " );
1588 printk("scsi: <fdomain> fdomain_16x0_biosparam: too many disks");
1698 .name = "fdomain",
1699 .proc_name = "fdomain",