Lines Matching defs:unchar
624 unchar version : 4,
626 unchar haaval : 1,
635 unchar : 4, /* unused low nibble */
637 unchar ocsena : 1, /* Overlap Command Support Enabled */
648 unchar host_addr[4]; /* Host Adapter SCSI ID for channels 3, 2, 1, 0 */
656 unchar drqx : 2,
660 unchar sync;
661 unchar : 4,
666 unchar max_chan : 3,
668 unchar max_lun;
669 unchar eisa : 1,
675 unchar irq : 4, /* Interrupt Request assigned to this controller */
679 unchar sync; /* 1 if scsi target id 7...0 is running sync scsi */
682 unchar isaena : 1, /* ISA i/o addressing is disabled/enabled */
687 unchar max_id : 5, /* Max SCSI target ID number */
691 unchar max_lun; /* Max SCSI LUN number */
692 unchar
700 unchar raidnum; /* Uniquely identifies this HBA in a system */
701 unchar notused;
711 unchar : 4,
717 unchar edis : 1, /* Disable EATA interface after config command */
723 unchar cpad[511];
729 unchar eoc : 1,
732 unchar adapter_status : 7, /* State related to current command */
735 unchar target_status; /* SCSI status received after data transfer */
736 unchar unused[2];
750 unchar din : 1,
758 unchar sense_len;
759 unchar unused[3];
760 unchar : 7,
762 unchar : 5,
766 unchar channel : 3,
768 unchar one : 1,
773 unchar sreset :1, /* SCSI Bus Reset Signal should be asserted */
781 unchar sense_len; /* Request Sense Length */
782 unchar unused[3];
783 unchar fwnest : 1, /* Send command to a component of an Array Group */
785 unchar phsunit : 1, /* Send to Target Physical Unit (bypass RAID) */
789 unchar target : 5, /* SCSI target ID */
791 unchar lun : 5, /* SCSI logical unit number */
797 unchar mess[3]; /* Massage to/from Target */
798 unchar cdb[12]; /* Command Descriptor Block */
991 static int do_dma(unsigned long iobase, unsigned long addr, unchar cmd)