Lines Matching refs:DPRINTK
138 #define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args)
406 DPRINTK("ibmtr_probe1(): unhappy that inb(0x%X) == 0x%X, "
417 DPRINTK("Cannot remap mmiobase memory area") ;
422 DPRINTK("PIOaddr: %4hx seg/intr: %2x mmio base: %p intr: %d\n"
468 DPRINTK( "Channel ID string not found for PIOaddr: %4hx\n",
470 DPRINTK("Expected for ISA: ");
472 DPRINTK(" found: ");
477 DPRINTK("Expected for MCA: ");
531 DPRINTK( "Hardware timeout during initialization.\n");
543 DPRINTK("irq=%d", irq);
546 DPRINTK(", ti->mmio=%p", ti->mmio);
643 DPRINTK("Unknown shared ram paging info %01X\n",
651 DPRINTK("Shared RAM paging code: %02X, "
671 DPRINTK("Shared RAM for this adapter (%05x) exceeds "
686 DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n",
694 DPRINTK("Could not grab PIO range. Halting driver.\n");
704 DPRINTK("%s %s found\n",
706 DPRINTK("using irq %d, PIOaddr %hx, %dK shared RAM.\n",
708 DPRINTK("Hardware address : %02X:%02X:%02X:%02X:%02X:%02X\n",
712 DPRINTK("Shared RAM paging enabled. "
716 DPRINTK("Shared RAM paging disabled. ti->page_mask %x\n",
789 DPRINTK("Maximum Receive Internet Protocol MTU 16Mbps: %d, 4Mbps: %d\n",
876 DPRINTK("Last time you were disconnected, how about now?\n");
901 DPRINTK("Adapter is up and running\n");
909 DPRINTK("TERMINATED via signal\n"); /*BMS useful */
951 DPRINTK("Opening adapter: Xmit bfrs: %d X %d, Rcv bfrs: %d X %d\n",
1018 DPRINTK("Setting functional address: ");
1064 DPRINTK("Adapter is closed.\n");
1119 DPRINTK("Adapter reopened.\n");
1129 DPRINTK("Open failed: Adapter speed must match "
1134 DPRINTK("Retrying open to adjust to "
1137 DPRINTK("Physical Insertion: No Monitor Detected, ");
1141 DPRINTK("Lobe Media Function Failure (0x11), ");
1147 DPRINTK("TR Adapter misc open failure, error code = ");
1153 } else DPRINTK("open failed: ret_code = %02X..., ", ret_code);
1163 DPRINTK("FAILURE, CAPUT\n");
1180 DPRINTK("Int from tok_driver, dev : %p irq%d\n", dev,irq);
1222 DPRINTK("Adapter check interrupt\n");
1223 DPRINTK("8 reason bytes follow: ");
1229 DPRINTK("ISRA_EVEN == 0x02%x\n",status);
1243 DPRINTK("adapter error: ISRP_EVEN : %02x\n",
1248 DPRINTK("ISRA_EVEN == 0x02%x\n",status);/*BMS*/
1259 DPRINTK("SRB resp: cmd=%02X rsp=%02X\n",
1267 DPRINTK("error on xmit_dir_frame request: %02X\n",
1284 DPRINTK("error on xmit_ui_frame request: %02X\n",
1300 DPRINTK("open_sap failed: ret_code = %02X, "
1322 DPRINTK("error on %02X: %02X\n",
1328 DPRINTK("error on dir_read_log: %02X\n",
1346 DPRINTK("Line errors %02X, Internal errors %02X, "
1366 DPRINTK("Unknown command %02X encountered\n",
1374 DPRINTK("ASB resp: cmd=%02X\n", readb(ti->asb));
1383 DPRINTK("unknown command in asb %02X\n",
1387 DPRINTK("ASB error %02X in cmd %02X\n",
1398 DPRINTK("ARB resp: cmd=%02X\n", readb(ti->arb));
1403 DPRINTK("DLC_STATUS new status: %02X on station %02X\n",
1414 DPRINTK("Ring Status Change...(0x%x)\n",
1419 DPRINTK("Remove received, or Auto-removal error"
1421 DPRINTK("We'll try to reopen the closed adapter"
1444 DPRINTK("Unknown command %02X in arb\n",
1455 DPRINTK("SSB resp: cmd=%02X rsp=%02X\n",
1464 DPRINTK("xmit ret_code: %02X xmit error code: "
1471 DPRINTK("xmit xid ret_code: %02X\n",
1474 DPRINTK("Unknown command %02X in ssb\n",
1529 DPRINTK("ti->init_srb_page=0x%x\n", ti->init_srb_page);
1530 DPRINTK("init_srb(%p):", ti->init_srb );
1543 DPRINTK("Initial interrupt : %d Mbps, shared RAM base %08x.\n",
1577 if (readb(ti->asb+RETCODE_OFST) != 0xFF) DPRINTK("ASB not free !!!\n");
1698 if (readb(ti->asb + RETCODE_OFST) !=0xFF) DPRINTK("ASB not free !!!\n");
1706 DPRINTK("Linux cannot handle greater than 18 bytes RIF\n");
1716 DPRINTK("offsetof data: %02X lan_hdr_len: %02X\n",
1718 DPRINTK("llc: %08X rec_buf_addr: %04X dev->mem_start: %lX\n",
1720 DPRINTK("dsap: %02X, ssap: %02X, llc: %02X, protid: %02X%02X%02X, "
1746 DPRINTK("Probably non-IP frame received.\n");
1747 DPRINTK("ssap: %02X dsap: %02X "
1764 DPRINTK("out of memory. frame dropped.\n");
1797 DPRINTK("CURIOUS, length=%d < rbuffer_len=%d\n",