Lines Matching refs:outw
186 outw(0,SEEQ_REA);
212 outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */
213 outw( 0, SEEQ_DMAAR); /* set starting PROM address */
214 outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */
223 outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */
225 outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
265 outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD );
376 outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
399 outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
406 outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
439 outw( lp->receive_ptr, SEEQ_DMAAR);
440 outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
481 outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
482 outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA);
533 outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
572 outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */
575 outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
576 outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */
578 outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1);
585 outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */
589 outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */
591 outw( 0x00ff, SEEQ_REA); /* Receive Area End */
596 outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD);
597 outw( 0, SEEQ_DMAAR);
598 outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1);
606 outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1);
607 outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2);
608 outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD);
635 outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD);
636 outw( transmit_ptr, SEEQ_DMAAR);
639 outw( htons(length + 4), SEEQ_BUFFER);
640 outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER );
645 outw( 0, SEEQ_BUFFER);
646 outw( 0, SEEQ_BUFFER);
649 outw( transmit_ptr, SEEQ_TPR);
657 outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD);