Lines Matching defs:DEB
119 #define DEB(x,y) if (i596_debug & (x)) { y; }
642 DEB(DEB_INIT,
664 DEB(DEB_INIT, printk("%s: starting i82596.\n", dev->name));
675 DEB(DEB_INIT, printk("%s: i82596 initialization successful\n", dev->name));
685 DEB(DEB_INIT, printk("%s: queuing CmdConfigure\n", dev->name));
691 DEB(DEB_INIT, printk("%s: queuing CmdSASetup\n", dev->name));
697 DEB(DEB_INIT, printk("%s: queuing CmdTDR\n", dev->name));
708 DEB(DEB_INIT, printk("%s: Issuing RX_START\n", dev->name));
719 DEB(DEB_INIT, printk("%s: Receive unit started OK\n", dev->name));
737 DEB(DEB_RXFRAME, printk("i596_rx(), rfd_head %p, rbd_head %p\n",
755 DEB(DEB_RXFRAME, printk(" rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
764 DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
818 DEB(DEB_ERRORS, printk("%s: Error, rfd.stat = 0x%04x\n",
866 DEB(DEB_RXFRAME, printk("frames %d\n", frames));
915 DEB(DEB_RESET, printk("i596_reset\n"));
944 DEB(DEB_ADDCMD, printk("i596_add_cmd cmd_head %p\n", lp->cmd_head));
986 DEB(DEB_OPEN, printk("%s: i596_open() irq %d.\n", dev->name, dev->irq));
1016 DEB(DEB_ERRORS, printk("%s: transmit timed out, status resetting.\n",
1023 DEB(DEB_ERRORS, printk("Resetting board.\n"));
1028 DEB(DEB_ERRORS, printk("Kicking board.\n"));
1048 DEB(DEB_STARTTX, printk("%s: i596_start_xmit(%x,%p) called\n", dev->name,
1063 DEB(DEB_ERRORS, printk("%s: xmit ring full, dropping packet.\n",
1086 DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
1187 DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
1189 DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
1190 DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
1191 DEB(DEB_INIT, printk(KERN_INFO "%s: lp at 0x%p (%d bytes), lp->scb at 0x%p\n",
1224 DEB(DEB_INTS, printk("%s: i596 interrupt, IRQ %d, status %4.4x.\n",
1230 DEB(DEB_ERRORS, printk("%s: interrupt with no events\n", dev->name));
1239 DEB(DEB_INTS, printk("%s: i596 interrupt completed command.\n", dev->name));
1241 DEB(DEB_INTS, printk("%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
1250 DEB(DEB_STATUS, printk("cmd_head->status = %04x, ->command = %04x\n",
1262 DEB(DEB_TXADDR, print_eth(skb->data, "tx-done"));
1287 DEB(DEB_ANY, printk("%s: link ok.\n", dev->name));
1296 DEB(DEB_TDR, printk("%s: Time %d.\n", dev->name, status & 0x07ff));
1331 DEB(DEB_INTS, printk("%s: i596 interrupt received a frame.\n", dev->name));
1336 DEB(DEB_ERRORS, printk("%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
1355 DEB(DEB_INTS, printk("%s: exiting interrupt.\n", dev->name));
1368 DEB(DEB_INIT, printk("%s: Shutting down ethercard, status was %4.4x.\n",
1381 DEB(DEB_STRUCT,i596_display_data(dev));
1409 DEB(DEB_MULTI, printk("%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
1460 DEB(DEB_MULTI, printk("%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n",