Lines Matching refs:tmpbyte
2462 unsigned char tmpbyte;
2466 tmpbyte = inb(iobase +1); // Read device ID
2469 tmpbyte);
2476 tmpbyte = inb(iobase + 1);
2477 if (tmpbyte != (conf->sir_io >> 2) ) {
2485 tmpbyte = inb(iobase + 1);
2486 tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2487 tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2488 outb(tmpbyte, iobase + 1);
2489 tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2490 if (tmpbyte != conf->fir_irq) {
2498 tmpbyte = inb(iobase + 1);
2499 if (tmpbyte != (conf->fir_io >> 3) ) {
2507 tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2508 if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2514 tmpbyte = inb(iobase + 1);
2515 tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2517 outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2520 tmpbyte = inb(iobase + 1);
2521 outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2525 tmpbyte = inb(iobase + 1);
2526 outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2529 tmpbyte = inb(iobase + 1);
2530 outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2533 tmpbyte = inb(iobase + 1);
2534 outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2564 unsigned char tmpbyte;
2585 pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2586 tmpbyte &= 0xf8; /* mask COMA bits */
2589 tmpbyte |= 0x00;
2592 tmpbyte |= 0x01;
2595 tmpbyte |= 0x02;
2598 tmpbyte |= 0x03;
2601 tmpbyte |= 0x04;
2604 tmpbyte |= 0x05;
2607 tmpbyte |= 0x06;
2610 tmpbyte |= 0x07;
2613 tmpbyte |= 0x01; /* COM2 default */
2615 IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
2616 pci_write_config_byte(dev, COM_DEC, tmpbyte);
2717 unsigned char tmpbyte;
2742 pci_read_config_byte(dev, reg, &tmpbyte);
2744 tmpbyte |= mask;
2745 pci_write_config_byte(dev, reg, tmpbyte);