Lines Matching defs:on
37 * on them.
43 * -- on page reclamation, the driver swaps the page with a spare page.
210 * module because 'HZ' in actually a function call on some flavors of
543 /* used on close. free all the spare buffers. */
607 /* put any inuse buffers back on the list */
683 /* poll and interrupt on link status change. */
734 * to replicate everything we do elsewhere on a link-down
924 /* enable serdes pins on saturn */
971 /* The link status bit latches on zero, so you must
1026 * sync problems on link down. to fix that, the following
1206 * on reset because complete == kick.
1207 * selective clear set up to prevent interrupts on resets
2057 * 3) on flow release, fix up the header.
2080 /* put rx descriptor back on ring. if a buffer is in use by a higher
2183 * force serialization on the single descriptor ring.
2221 /* get info on the packet */
2303 /* put completion entries back on the ring */
2381 * NOTE: we can get this on a link transition. */
2434 * NOTE: we can get this on a link transition.
2993 * specify the maximum frame size to prevent RX tag errors on
3036 * can really count on this behavior. cas_set_multicast uses
3078 int on = off - max_frame;
3080 cp->rx_pause_on = on;
3604 "(rxfifo: %d off: %d on: %d)\n",
3650 /* Must be invoked under cp->lock. on earlier cassini boards,
3836 /* freed on close */
3876 /* allocated on open */
3919 * on error as well.
4146 * on the controller. cassini+ has up to 4 interrupts
4404 /* Record PHY settings if HW is on. */
4709 /* we must always turn on parity response or else parity
4711 * in addition, we want to turn MWI on.
4976 * because on resume, we'll call cas_init_hw with