Lines Matching refs:DEV_LABEL
164 #define DEV_LABEL "lanai"
169 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
173 printk(KERN_ERR DEV_LABEL ": " format, ##args); \
185 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
564 printk(KERN_ERR DEV_LABEL
812 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
867 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
938 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
981 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
988 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
996 printk(KERN_ERR DEV_LABEL
1010 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
1020 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
1027 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
1088 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
1109 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
1118 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
1129 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
1274 printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
1365 printk(KERN_INFO DEV_LABEL
1372 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
1417 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
1441 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
1508 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
1580 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not "
1701 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
1845 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
1854 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
1862 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
1867 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1874 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1939 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
1957 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
1963 printk(KERN_WARNING DEV_LABEL
1968 printk(KERN_WARNING DEV_LABEL
1976 printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
1982 printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
1992 printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
2178 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
2236 DEV_LABEL, lanai)) != 0) {
2237 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
2255 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
2261 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
2290 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
2366 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
2487 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
2607 printk(KERN_ERR DEV_LABEL
2612 atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
2614 printk(KERN_ERR DEV_LABEL
2647 .name = DEV_LABEL,
2658 printk(KERN_ERR DEV_LABEL ": no adapter found\n");