Lines Matching refs:logmsg
281 # logmsg is our general message logging subroutine.
283 sub logmsg {
304 logmsg "runtests.pl received SIG$signame, exiting\n";
377 logmsg "startnew: $cmd\n" if ($verbose);
383 logmsg "startnew: fork() failure detected\n";
404 logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
407 logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
412 logmsg "startnew: child process has failed to start\n" if($verbose);
432 logmsg "startnew: child process has died, server might start up\n"
523 logmsg " CMD: $testcmd\n" if($verbose);
535 logmsg " found no allocs to make fail\n";
539 logmsg " $count allocations to make fail\n";
554 logmsg "Fail alloc no: $limit at $now\r";
563 logmsg "*** Alloc number $limit is now set to fail ***\n" if($gdbthis);
572 #logmsg "$_ Returned " . $ret >> 8 . "\n";
579 logmsg " core dumped\n";
587 logmsg " system() returned $ret\n";
601 logmsg "** MEMORY FAILURE\n";
602 logmsg @memdata;
603 logmsg `$memanalyze -l $memdump`;
608 logmsg " Failed on alloc number $limit in test.\n",
615 logmsg "torture OK\n";
674 logmsg "Warning: $server server unexpectedly alive\n";
718 logmsg "RUN: $cmd\n" if($verbose);
723 logmsg "RUN: curl command died with a coredump\n";
728 logmsg "RUN: curl command returned $res\n";
731 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
751 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
755 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
800 logmsg "RUN: $cmd\n" if($verbose);
805 logmsg "RUN: curl command died with a coredump\n";
818 logmsg "RUN: Unknown server on our $server port: $port\n";
826 logmsg "RUN: Verifying our test $server server took $took seconds\n";
863 logmsg "RUN: $cmd\n" if($verbose);
868 logmsg "RUN: curl command died with a coredump\n";
873 logmsg "RUN: curl command returned $res\n";
876 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
896 logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
900 logmsg "RUN: Unknown server on our $server port: $port\n";
924 logmsg "RUN: SSH server has died after starting up\n";
944 logmsg "RUN: SFTP server cannot find $sftpexe\n";
950 logmsg "RUN: SFTP server cannot find $sshexe\n";
1003 logmsg "RUN: $cmd\n" if($verbose);
1008 logmsg "RUN: curl command died with a coredump\n";
1013 logmsg "RUN: curl command returned $res\n";
1016 logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
1037 logmsg "RUN: $server server has died after starting up\n";
1047 logmsg "RUN: failed to resolve host (https://$ip:$port/verifiedserver)\n";
1051 logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
1073 logmsg "RUN: SOCKS server has died after starting up\n";
1149 logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
1204 logmsg "RUN: failed to start the $srvrname server\n";
1214 logmsg "RUN: $srvrname server failed verification\n";
1224 logmsg "RUN: $srvrname server is now running PID $httppid\n";
1285 logmsg "RUN: failed to start the $srvrname server\n";
1295 logmsg "RUN: $srvrname server failed verification\n";
1307 logmsg "RUN: $srvrname server is now running PID $httpspid\n";
1365 logmsg "RUN: failed to start the $srvrname server\n";
1375 logmsg "RUN: $srvrname server failed verification\n";
1385 logmsg "RUN: $srvrname server is now running PID $httptlspid\n";
1460 logmsg "RUN: failed to start the $srvrname server\n";
1470 logmsg "RUN: $srvrname server failed verification\n";
1481 logmsg "RUN: $srvrname server is now running PID $ftppid\n";
1542 logmsg "RUN: failed to start the $srvrname server\n";
1552 logmsg "RUN: $srvrname server failed verification\n";
1564 logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
1624 logmsg "RUN: failed to start the $srvrname server\n";
1634 logmsg "RUN: $srvrname server failed verification\n";
1644 logmsg "RUN: $srvrname server is now running PID $tftppid\n";
1705 logmsg "RUN: failed to start the $srvrname server\n";
1715 logmsg "RUN: $srvrname server failed verification\n";
1725 logmsg "RUN: $srvrname server is now running PID $rtsppid\n";
1787 logmsg "RUN: failed to start the $srvrname server\n";
1799 logmsg "RUN: $srvrname server failed verification\n";
1815 logmsg "RUN: SFTP server failed verification\n";
1827 logmsg "RUN: $srvrname server is now running PID $pid2\n";
1870 logmsg "RUN: SOCKS server cannot find running SSH server\n";
1878 logmsg "RUN: SOCKS server cannot find $sshdexe\n";
1887 logmsg "$sshderror\n" if($verbose);
1888 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
1892 logmsg "ssh server found $sshd is $sshdverstr\n" if($verbose);
1897 logmsg "RUN: SOCKS server cannot find $sshexe\n";
1906 logmsg "$ssherror\n" if($verbose);
1907 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
1915 logmsg "ssh client found $ssh is $sshverstr\n";
1916 logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
1920 logmsg "ssh client found $ssh is $sshverstr\n" if($verbose);
1925 logmsg "Warning: version mismatch: sshd $sshdverstr - ssh $sshverstr\n"
1931 logmsg "RUN: SOCKS server cannot find $sshconfig\n";
1944 logmsg "RUN: failed to start the $srvrname server\n";
1957 logmsg "RUN: $srvrname server failed verification\n";
1966 logmsg "RUN: $srvrname server is now running PID $pid2\n";
2123 # logmsg "FILTER: off $filter from $infile to $ofile\n";
2146 logmsg "\n $subject FAILED:\n";
2147 logmsg showdiff($LOGDIR, $firstref, $secondref);
2150 logmsg "FAILED\n";
2224 logmsg "Serious error, can't find our \"real\" path\n";
2354 logmsg "unable to get curl's version, further details are:\n";
2355 logmsg "issued command: \n";
2356 logmsg "$versioncmd \n";
2358 logmsg "command failed with: \n";
2359 logmsg "$versnoexec \n";
2362 logmsg sprintf("command died with signal %d, and %s coredump.\n",
2366 logmsg sprintf("command exited with value %d \n", $versretval >> 8);
2368 logmsg "contents of $curlverout: \n";
2370 logmsg "contents of $curlvererr: \n";
2418 logmsg ("********* System characteristics ******** \n",
2425 logmsg sprintf("* Server SSL: %8s", $stunnel?"ON ":"OFF");
2426 logmsg sprintf(" libcurl SSL: %s\n", $ssl_version?"ON ":"OFF");
2427 logmsg sprintf("* debug build: %8s", $debug_build?"ON ":"OFF");
2428 logmsg sprintf(" track memory: %s\n", $curl_debug?"ON ":"OFF");
2429 logmsg sprintf("* valgrind: %8s", $valgrind?"ON ":"OFF");
2430 logmsg sprintf(" HTTP IPv6 %s\n", $http_ipv6?"ON ":"OFF");
2431 logmsg sprintf("* FTP IPv6 %8s", $ftp_ipv6?"ON ":"OFF");
2432 logmsg sprintf(" Libtool lib: %s\n", $libtool?"ON ":"OFF");
2433 logmsg sprintf("* Shared build: %s\n", $has_shared);
2435 logmsg sprintf("* SSL library: %13s\n", $ssllib);
2438 logmsg "* Ports:\n";
2440 logmsg sprintf("* HTTP/%d ", $HTTPPORT);
2441 logmsg sprintf("FTP/%d ", $FTPPORT);
2442 logmsg sprintf("FTP2/%d ", $FTP2PORT);
2443 logmsg sprintf("RTSP/%d ", $RTSPPORT);
2445 logmsg sprintf("FTPS/%d ", $FTPSPORT);
2446 logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
2448 logmsg sprintf("\n* TFTP/%d ", $TFTPPORT);
2450 logmsg sprintf("HTTP-IPv6/%d ", $HTTP6PORT);
2451 logmsg sprintf("RTSP-IPv6/%d ", $RTSP6PORT);
2454 logmsg sprintf("FTP-IPv6/%d ", $FTP6PORT);
2457 logmsg sprintf("TFTP-IPv6/%d ", $TFTP6PORT);
2459 logmsg sprintf("\n* GOPHER/%d ", $GOPHERPORT);
2461 logmsg sprintf("GOPHER-IPv6/%d", $GOPHERPORT);
2463 logmsg sprintf("\n* SSH/%d ", $SSHPORT);
2464 logmsg sprintf("SOCKS/%d ", $SOCKSPORT);
2465 logmsg sprintf("POP3/%d ", $POP3PORT);
2466 logmsg sprintf("IMAP/%d ", $IMAPPORT);
2467 logmsg sprintf("SMTP/%d\n", $SMTPPORT);
2469 logmsg sprintf("* POP3-IPv6/%d ", $POP36PORT);
2470 logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
2471 logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
2474 logmsg sprintf("* HTTPTLS/%d ", $HTTPTLSPORT);
2476 logmsg sprintf("HTTPTLS-IPv6/%d ", $HTTPTLS6PORT);
2478 logmsg "\n";
2483 logmsg "***************************************** \n";
2635 logmsg "Warning: test$testnum not present in tests/data/Makefile.am\n";
2638 logmsg "Warning: test$testnum is explicitly disabled\n";
2645 logmsg "RUN: $testnum doesn't look like a test case\n";
2859 logmsg "prechecked $cmd\n" if($verbose);
2877 logmsg sprintf("test %03d...", $testnum);
2920 logmsg "[$name]\n";
2969 logmsg "ERROR: section client=>file has no name attribute\n";
2975 # logmsg "DEBUG: writing file " . $filename . "\n";
3079 logmsg "$CMDLINE\n";
3096 logmsg "perl: $code\n";
3097 logmsg "precommand: $@";
3151 logmsg "core dumped\n";
3153 logmsg "running gdb for post-mortem analysis:\n";
3175 logmsg "Warning: server logs lock timeout ",
3252 logmsg "Warning: $server server unexpectedly alive\n";
3269 logmsg "postcheck $cmd\n" if($verbose);
3274 logmsg " postcheck FAILED\n";
3439 logmsg "ERROR: section verify=>file has no name attribute\n";
3499 logmsg " exit FAILED\n";
3507 logmsg "\n** ALERT! memory debugging with no output file?\n"
3521 logmsg "\n** MEMORY FAILURE\n";
3522 logmsg @memdata;
3539 logmsg "ERROR: unable to read $LOGDIR\n";
3554 logmsg "ERROR: valgrind log file missing for test $testnum\n";
3561 logmsg " valgrind ERROR ";
3562 logmsg @e;
3571 logmsg " valgrind SKIPPED\n";
3580 logmsg "$ok " if(!$short);
3621 logmsg sprintf("* kill pid for %s => %d\n",
3640 logmsg "Warning: $server server unexpectedly alive\n";
3706 logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
3738 logmsg sprintf("* pid gopher-ipv6 => %d %d\n", $pid,
3769 logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
3798 logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
3833 logmsg sprintf("* pid ftps => %d %d\n", $pid, $pid2)
3872 logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
3891 logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
3910 logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
3965 logmsg "Not OpenSSH or SunSSH; socks5 tests need at least OpenSSH 3.7\n";
3970 logmsg "$sshdverstr insufficient; socks5 tests need at least OpenSSH 3.7\n";
3975 logmsg "$sshdverstr insufficient; socks5 tests need at least SunSSH 1.0\n";
3981 logmsg "* starts no server\n" if ($verbose);
4044 logmsg "\nTest suite total running time breakdown per task...\n\n";
4096 logmsg "Spent ". sprintf("%08.3f ", $timesrvrtot) .
4098 logmsg "Spent ". sprintf("%08.3f ", $timepreptot) .
4100 logmsg "Spent ". sprintf("%08.3f ", $timetooltot) .
4102 logmsg "Spent ". sprintf("%08.3f ", $timelocktot) .
4104 logmsg "Spent ". sprintf("%08.3f ", $timevrfytot) .
4106 logmsg "Spent ". sprintf("%08.3f ", $timetesttot) .
4110 logmsg "\nTest server starting and verification time per test ".
4112 logmsg "-time- test\n";
4113 logmsg "------ ----\n";
4116 logmsg "$txt\n";
4120 logmsg "\nTest definition reading and preparation time per test ".
4122 logmsg "-time- test\n";
4123 logmsg "------ ----\n";
4126 logmsg "$txt\n";
4130 logmsg "\nTest tool execution time per test ".
4132 logmsg "-time- test\n";
4133 logmsg "------ ----\n";
4136 logmsg "$txt\n";
4140 logmsg "\nTest server logs lock removal time per test ".
4142 logmsg "-time- test\n";
4143 logmsg "------ ----\n";
4146 logmsg "$txt\n";
4150 logmsg "\nTest results verification time per test ".
4152 logmsg "-time- test\n";
4153 logmsg "------ ----\n";
4156 logmsg "$txt\n";
4160 logmsg "\nTotal time per test ".
4162 logmsg "-time- test\n";
4163 logmsg "------ ----\n";
4166 logmsg "$txt\n";
4169 logmsg "\n";
4347 #logmsg "Valgrind failure, disable it\n";
4488 logmsg "can't log command lines to $CURLLOG\n";
4510 logmsg " $line\n";
4522 logmsg "=== File too long: $tailskip lines omitted here\n";
4525 logmsg "$tail[$_]";
4539 logmsg "== Contents of files in the $LOGDIR/ dir after test $testnum\n";
4577 logmsg "=== Start of file $log\n";
4579 logmsg "=== End of file $log\n";
4618 logmsg "\n - abort tests\n";
4644 logmsg sprintf("TESTDONE: $ok tests out of $total reported OK: %d%%\n",
4648 logmsg "TESTFAIL: These test cases failed: $failed\n";
4652 logmsg "TESTFAIL: No tests were performed\n";
4656 logmsg "TESTDONE: $all tests were considered during ".
4662 logmsg "TESTINFO: $skipped tests were skipped due to these restraints:\n";
4674 logmsg ", " if($c);
4675 logmsg $_;
4679 logmsg ")\n";