Lines Matching defs:dprintkl
111 #define dprintkl(level, format, arg...) \
125 dprintkl(KERN_DEBUG , format , ## arg); \
582 dprintkl(KERN_INFO, "Using safe settings.\n");
1116 dprintkl(KERN_INFO, "queue_command: Ignore target <%02i-%i>\n",
1125 dprintkl(KERN_ERR, "queue_command: No such device <%02i-%i>",
1214 dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
1217 dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
1229 dprintkl(KERN_INFO, "dump: SCSI{status=0x%04x fifocnt=0x%02x "
1246 dprintkl(KERN_INFO, "dump: DMA{cmd=0x%04x fifocnt=0x%02x fstat=0x%02x "
1259 dprintkl(KERN_INFO, "dump: gen{gctrl=0x%02x gstat=0x%02x gtmr=0x%02x} "
1314 dprintkl(KERN_INFO,
1382 dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
1387 dprintkl(KERN_DEBUG, "eh_abort: No such device\n");
1398 dprintkl(KERN_DEBUG, "eh_abort: Command was waiting\n");
1404 dprintkl(KERN_DEBUG, "eh_abort: Command in progress\n");
1406 dprintkl(KERN_DEBUG, "eh_abort: Command not found\n");
1418 dprintkl(KERN_INFO,
1448 dprintkl(KERN_INFO,
1496 dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
1577 dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
1688 dprintkl(KERN_DEBUG,
1694 /*dprintkl(KERN_DEBUG, "handle_interrupt: intstatus = 0x%02x ", scsi_intstatus); */
1708 dprintkl(KERN_INFO, "Host does not support target mode!\n");
1718 dprintkl(KERN_DEBUG,
1795 dprintkl(KERN_INFO, "Interrupt from DMA engine: 0x%02x!\n", dma_status);
1796 dprintkl(KERN_INFO, "Ignoring DMA error (probably a bad thing) ...\n");
1827 dprintkl(KERN_DEBUG,
2083 dprintkl(KERN_INFO,
2116 dprintkl(KERN_INFO, "data_out_phase0: "
2170 dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
2331 dprintkl(KERN_ERR, "data_io_transfer: Using tmp_srb!\n");
2344 dprintkl(KERN_DEBUG, "data_io_transfer: Xfer pending! "
2550 dprintkl(KERN_INFO, "msgin_reject: 0x%02x <%02i-%i>\n",
2565 dprintkl(KERN_DEBUG,
2604 dprintkl(KERN_DEBUG, "msgin_qtag: Unknown tag %i - abort\n", tag);
2623 dprintkl(KERN_DEBUG, "msgin_set_async: No sync transfers <%02i-%i>\n",
2671 dprintkl(KERN_INFO,
2684 dprintkl(KERN_INFO,
2694 dprintkl(KERN_DEBUG, "msgin_set_sync: answer w/%ins %i\n",
2746 dprintkl(KERN_DEBUG,
2955 dprintkl(KERN_ERR, "disconnect: No such device\n");
2973 dprintkl(KERN_ERR,
2981 dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
2996 dprintkl(KERN_DEBUG,
3061 dprintkl(KERN_DEBUG, "reselect: Arb lost Resel won, "
3086 dprintkl(KERN_DEBUG, "reselect: Expects identify msg. "
3092 dprintkl(KERN_ERR, "reselect: From non existent device "
3100 dprintkl(KERN_DEBUG, "reselect: in spite of forbidden "
3114 dprintkl(KERN_DEBUG,
3262 dprintkl(KERN_DEBUG,
3268 dprintkl(KERN_DEBUG,
3274 dprintkl(KERN_DEBUG,
3280 dprintkl(KERN_DEBUG,
3286 dprintkl(KERN_DEBUG,
3335 dprintkl(KERN_INFO, "QUEUE_FULL for dev <%02i-%i> with %i cmnds\n",
3444 dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
3462 dprintkl(KERN_INFO, "doing_srb_done: pids ");
3491 dprintkl(KERN_DEBUG,
3495 dprintkl(KERN_DEBUG,
3520 dprintkl(KERN_DEBUG, "ML queued %i cmnds again to <%02i-%i>\n",
3578 dprintkl(KERN_INFO, "scsi_reset_detect: acb=%p\n", acb);
3645 dprintkl(KERN_DEBUG,
4120 dprintkl(KERN_WARNING,
4173 dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
4179 dprintkl(KERN_INFO, " AdaptMode=0x%02x, Tags=%i(%02i), DelayReset=%is\n",
4230 dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
4250 dprintkl(KERN_INFO, "%sConnectors: ",
4416 dprintkl(KERN_INFO, "Performing initial SCSI bus reset\n");
4449 dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
4458 dprintkl(KERN_INFO, "Failed to register IRQ\n");
4475 dprintkl(KERN_DEBUG, "Memory allocation for SG tables failed\n");
4715 dprintkl(KERN_INFO, "%s %s\n", DC395X_BANNER, DC395X_VERSION);
4748 dprintkl(KERN_INFO, "PCI Enable device failed.\n");
4760 dprintkl(KERN_INFO, "scsi_host_alloc failed\n");
4769 dprintkl(KERN_INFO, "adapter init failed\n");
4777 dprintkl(KERN_ERR, "scsi_add_host failed\n");