Lines Matching refs:DPRINTK
184 #define DPRINTK(nlevel, klevel, fmt, args...) \
655 DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
660 DPRINTK(HW, ERR, "Self-test failed: timed out\n");
764 DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
919 DPRINTK(HW, DEBUG,
1033 DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1035 DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1037 DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
1308 DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
1328 DPRINTK(PROBE,ERR, "ucode load failed\n");
1369 DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
1388 DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
1417 DPRINTK(HW, ERR, "e100_hw_init\n");
1461 DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
1534 DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
1564 DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
1571 DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n",
1575 DPRINTK(LINK, INFO, "link down\n");
1628 DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
1637 DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
1642 DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
1662 DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
1811 DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
1955 DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
2107 DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
2357 DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
2533 DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
2581 DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
2586 DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
2593 DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
2598 DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
2606 DPRINTK(PROBE, INFO, "using i/o access mode\n");
2610 DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
2644 DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
2657 DPRINTK(PROBE, ERR, "Invalid MAC address from "
2662 DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
2675 DPRINTK(PROBE, ERR, "Error clearing wake event\n");
2679 DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
2683 DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, "