Lines Matching refs:to
3 * Rescue code, made to reside at the beginning of the
11 * corrupt that we cant use it to boot into the ftp flash
12 * loader, and instead we initialize the serial port to
18 * The partitiontable is designed so that it is transparent to
54 * to check the checksum for RO partitions, since the others will
56 * means RO, 0 means RW. That way, it is possible to set a partition
58 * write 0's to the flash.
79 ;; ROM loads, so the same host loader can be used to load a rescued
131 ;; first put a jump test to give a possibility of upgrading the rescue code
134 ;; change 1's to 0's without erasing the sector, it is possible to add new
145 .dword 0xffffffff ; can be overwritten later to insert new code
149 ;; Start MII clock to make sure it is running when tranceiver is reset
154 ;; We need to setup the bus registers before we start using the DRAM
223 beq ploop ; checksums matched, go to next entry
226 ;; otherwise fall through to the rescue code.
253 moveq 0, $r1 ; "timer" to clock out a LED red flash
309 ;; check r7, which contains either -1 or the partition to boot from
330 ;; If the first physical flash memory is exceeded wrap to the second one.
339 lslq 20, $r6 ; Convert MB to bytes
351 3: move.d MEM_CSE1_START, $r1 ; wrap to second flash