• Home
  • History
  • Annotate
  • Raw
  • Download
  • only in /netgear-R7800-V1.0.2.28/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/wmi/

Lines Matching refs:frame

35    message transport (HTC), a data frame is encapsulated in a WMI message.
228 Send a special frame (special feature)
243 Add application-specified IE to a management frame
298 Specify whether the disassociated frame should be sent upon
301 Limit how many times the device tries to send a frame
502 particular AP. If this bit is set, a reassociation frame is
503 sent. If this bit is clear, an association request frame is
555 Send Reassoc frame while connecting, otherwise send
624 event, once the response for the ADDTS frame comes.
629 Changing the interval of sending auto QoS Null frame in WMM mode;
633 Changing the interval of a QoS null frame sending in WMM mode and enabling
1201 Sets Link Quality thresholds, the sampling will happen at every unicast data frame
1232 Special feature, sends a special frame.
1248 <frmtype> = 1 Probe request frame
1249 = 2 Probe response frame
1257 Send a special frame only when special mode is on.
1375 UINT8 aifsn The arbitration inter-frame space number
1434 used in the [Re]AssocRequest frame.
1453 Add an application-specified IE to a management frame. The maximum length is
1457 wmiconfig --setappie <frame> <IE>, where:
1459 frame
1464 IE is sent in the management frame)
1471 Length of the IE to add to the GMT frame
1480 Supported only for the probe request and association request management frame
1481 types. Also, only one IE can be added per management frame type.
1656 frame. See also �Scan and Roam� on page C-1.
2037 which the STA accepts the frame(s) from the host for a
2039 restarts with every frame received from the host. On
2042 connection. The value resets with every frame
2050 frame is kept alive in the AR6001 before being
2342 remains awake after frame Rx/Tx before going
2408 or null frame from the AP
2504 Specify whether the disassociated frame should be sent or not upon reassociation.
2535 attempt to send a frame before they give up.
2545 which type of frame is of interest.
2553 device attempts to retry a frame Tx,
2569 MGMT_FRAMETYPE = 0 Management frame
2570 CONTROL_FRAMETYPE = 1 Control frame
2571 DATA_FRAMETYPE = 2 Data frame
3226 (Special feature) informs the host of the reception of a special frame
3270 response frame that pass the filter specified in the �SET_BSS_FILTER� command.
3272 response frame. The 802.11 header is not present. For formats of beacon and probe-
3278 were detected in the management frame. The frame type field has been extended to
3295 frame was received
3310 Indicates a beacon frame
3312 Indicates a probe response frame
3460 Length of the 802.11 association response frame
3464 Copy of the 802.11 association response frame
3684 Special feature, informs host of the reception of a special frame.
3863 encrypted frame received earlier
3866 to the TKIP frame format
3869 to the CCMP frame format
3872 encrypted frame received earlier
4083 data frame Tx, if certain thresholds are met, and corresponding
4263 Set link quality thresholds, the sampling happens at every unicast data frame Tx, if