Lines Matching refs:interval
250 Set the beacon interval for an ad hoc network
278 Request a listen interval
620 corresponding TSPEC with the AP. The maximum and minimum service interval
629 Changing the interval of sending auto QoS Null frame in WMM mode;
633 Changing the interval of a QoS null frame sending in WMM mode and enabling
640 <trafficType> <voice PS capability> <min service interval> <max
641 service interval> <inactivity interval> <suspension interval>
666 <min service interval>
668 <max service interval>
669 Inactivity interval (in ms) (0 = Infinite)
670 <suspension interval>
716 UINT32 minServiceInt Minimum service interval: the min.
718 UINT32 maxServiceInt Maximum service interval: the max.
724 UINT32 suspensionInt Suspension interval (in ms)
1545 Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
1546 impact on power savings. To some degree, a longer interval reduces power
1554 UINT16 beaconInterval Specifies the beacon interval in TU units (1024 ms)
1560 The default beacon interval is 100 TUs (102.4 ms)
1861 connection, but they do so at the interval corresponding to a foreground scan as
2024 chosen should be based on the beacon interval (see
2073 The host uses this command to request a listen interval, which determines how often
2074 the AR6000 device should wake up and listen for traffic. The listen interval can be set
2076 the request (e.g., if the beacon interval is greater than the requested listen interval, the
2077 device sets the listen interval to the beacon interval). The actual listen interval used
2087 Specifies the listen interval in Kms
2091 Specifies the listen interval in beacons,
2098 The device sets the listen interval equal to the beacon interval of the AP it associates
2358 DTIM period follows the listen interval (e.g., if
2359 the listen interval is 4 and the DTIM period is 2,
2363 the DTIM period is 2 and the listen interval is 4,
2695 The device implements a binary backoff interval for foreground scanning when it
2697 CONNECT command is received. The first interval is ForegroundScanStartPeriod,
2698 which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
2711 First interval used by the device when it
2719 The maximum interval the device waits between
3082 Time interval between scans (in ms)
3229 A prioritized stream has been idle for a specified interval
3413 Listen interval (in Kms) that the AR6000 are
3710 flow (priority marked in IP TOS) being idle for the default inactivity interval period