Lines Matching defs:data
130 /* This data below is used only by driver */
148 * @brief NSS GMAC device data
325 ath_mmd_acc_ctrl_data_no_incr = 0x4000, /* data, no post incr */
326 ath_mmd_acc_ctrl_data_incr_rw = 0x8000, /* data, post incr on r/w */
327 ath_mmd_acc_ctrl_data_incr_w = 0xc000, /* data, post incr on write
353 gmac_gmii_data = 0x0014, /* GMII data Register(ext. Phy) */
607 /* gmac_gmii_data = 0x0014, GMII data Register(ext. Phy) Layout */
767 dma_error_bit2 = 0x02000000, /* (EB)Error bits 0-data buffer,
778 dma_tx_reading = 0x00300000, /* Running - reading the data
1072 desc_tx_underflow = 0x00000002, /* (UF)Tx - late data arrival
1317 uint32_t data;
1320 data = readl_relaxed((unsigned char *)addr);
1322 return data;
1330 * @param[in] data to be written
1355 uint32_t data = 0;
1357 data = bitpos | nss_gmac_read_reg(regbase, regoffset);
1358 nss_gmac_write_reg(regbase, regoffset, data);
1373 uint32_t data = 0;
1375 data = ~bitpos & nss_gmac_read_reg(regbase, regoffset);
1376 nss_gmac_write_reg(regbase, regoffset, data);
1391 uint32_t data;
1393 data = bitpos & nss_gmac_read_reg(regbase, regoffset);
1395 return data != 0;
1401 uint32_t reg, uint16_t data);
1475 uint32_t reg_offset, uint16_t data,
1478 uint32_t reg_offset, uint16_t *data,
1719 * transmission of data from this descriptor is over. This returns the
1909 * Get back the descriptor from DMA after data has been received.
1910 * When the DMA indicates that the data is received (interrupt is generated),
1911 * this function should be called to get the descriptor and hence the data
1944 * May be useful when data is spread over multiple buffers/descriptors
1974 uint32_t data;
1976 data = readl_relaxed(gmacdev->dma_base + dma_status);
1977 writel_relaxed(data, gmacdev->dma_base + dma_status);
2063 uint32_t data = 0;
2065 data = ~interrupts & readl_relaxed(gmacdev->dma_base + dma_interrupt);
2066 writel_relaxed(data, gmacdev->dma_base + dma_interrupt);
2076 * the dma_tx_poll_demand is written. (the data writeen could be anything).
2089 * the dma_rx_poll_demand is written. (the data writeen could be anything).