Lines Matching refs:LOGNAME
75 # define LOGNAME "msnd_classic"
78 # define LOGNAME "snd_msnd_pinnacle"
136 snd_printd(KERN_WARNING LOGNAME ": Play underflow %i\n",
143 snd_printd(KERN_WARNING LOGNAME ": Record overflow\n");
148 snd_printd(KERN_WARNING LOGNAME
161 snd_printd(KERN_WARNING LOGNAME ": HIMT message %d 0x%02x\n",
211 snd_printk(KERN_ERR LOGNAME ": Cannot reset DSP\n");
227 snd_printk(KERN_ERR LOGNAME ": I/O port conflict\n");
239 printk(KERN_INFO LOGNAME ": %s, "
299 printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, "
391 printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE);
396 printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE);
402 printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
406 printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
439 printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n");
449 printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n");
458 snd_printd(KERN_ERR LOGNAME ": DSP reset timeout\n");
480 printk(KERN_WARNING LOGNAME ": DSP reset failed\n");
515 printk(KERN_WARNING LOGNAME ": ADC calibration failed\n");
549 printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", chip->irq);
558 printk(KERN_ERR LOGNAME
567 printk(KERN_ERR LOGNAME
585 printk(KERN_ERR LOGNAME ": error creating new PCM device\n");
591 printk(KERN_ERR LOGNAME ": error creating new Mixer device\n");
606 printk(KERN_ERR LOGNAME
657 printk(KERN_ERR LOGNAME ": snd_msnd_write_cfg: I/O error\n");
746 printk(KERN_INFO LOGNAME ": Resetting all devices\n");
827 printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n");
840 printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set "
847 printk(KERN_ERR LOGNAME
860 printk(KERN_ERR LOGNAME
871 printk(KERN_ERR LOGNAME ": \"mem\" - must be set to "
879 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
881 printk(KERN_INFO LOGNAME
902 printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
946 printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%lx\n",
950 printk(KERN_ERR LOGNAME ": Config port 0x%lx conflict\n",
974 printk(KERN_INFO LOGNAME
989 printk(KERN_INFO LOGNAME
1002 printk(KERN_INFO LOGNAME
1041 printk(KERN_ERR LOGNAME ": Probe failed\n");
1048 printk(KERN_ERR LOGNAME ": Attach failed\n");
1168 printk(KERN_ERR LOGNAME ": Probe failed\n");
1174 printk(KERN_ERR LOGNAME ": Attach failed\n");