Lines Matching refs:__func__
301 dbg("%s", __func__);
306 "%s - request \"whiteheat.fw\" failed\n", __func__);
313 __func__);
327 __func__, response, be32_to_cpu(record->addr),
346 "(%d %04X %p %d)\n", __func__, response,
364 "(%d %04X %p %d)\n", __func__, response,
631 dbg("%s", __func__);
666 dbg("%s - port %d", __func__, port->number);
700 __func__, retval);
707 dbg("%s - exit, retval = %d", __func__, retval);
720 dbg("%s - port %d", __func__, port->number);
767 dbg("%s - port %d", __func__, port->number);
770 dbg("%s - write request of 0 bytes", __func__);
791 __func__, bytes, urb->transfer_buffer);
799 __func__, result);
825 dbg("%s - port %d", __func__, port->number);
833 dbg("%s - returns %d", __func__, room);
843 dbg("%s - port %d", __func__, port->number);
860 dbg("%s - port %d", __func__, port->number);
885 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
933 dbg("%s - port %d", __func__, port->number);
942 dbg("%s - returns %d", __func__, chars);
952 dbg("%s - port %d", __func__, port->number);
968 dbg("%s - port %d", __func__, port->number);
989 dbg("%s", __func__);
1006 dbg("%s", __func__);
1010 dbg("%s - command_info is NULL, exiting.", __func__);
1014 dbg("%s - nonzero urb status: %d", __func__, status);
1022 __func__, urb->actual_length, data);
1033 dbg("%s - event received", __func__);
1040 dbg("%s - bad reply from firmware", __func__);
1047 __func__, result);
1059 dbg("%s - port %d", __func__, port->number);
1065 dev_err(&port->dev, "%s - Not my urb!\n", __func__);
1073 __func__, status);
1081 __func__, urb->actual_length, data);
1103 dbg("%s - port %d", __func__, port->number);
1109 dev_err(&port->dev, "%s - Not my urb!\n", __func__);
1117 __func__, status);
1138 dbg("%s - command %d", __func__, command);
1152 dbg("%s - submit urb failed", __func__);
1163 dbg("%s - command timed out.", __func__);
1169 dbg("%s - command failed.", __func__);
1175 dbg("%s - command completed.", __func__);
1226 dbg("%s - data bits = %d", __func__, port_settings.bits);
1242 dbg("%s - parity = %c", __func__, port_settings.parity);
1249 dbg("%s - stop bits = %d", __func__, port_settings.stop);
1257 dbg("%s - hardware flow control = %s %s %s %s", __func__,
1268 dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1273 __func__, port_settings.xon, port_settings.xoff);
1277 dbg("%s - baud rate = %d", __func__, port_settings.baud);
1373 __func__, retval);
1501 __func__, result);