Lines Matching refs:number
234 int port_num; /*Actual port number in the device(1,2,etc) */
325 /* For the UART control registers, the application number need
328 val |= (((__u16) port->number -
330 dbg("mos7840_set_uart_reg application number is %x", val);
332 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
333 val |= (((__u16) port->number -
335 dbg("mos7840_set_uart_reg application number is %x",
339 (((__u16) port->number -
341 dbg("mos7840_set_uart_reg application number is %x",
368 /* dbg("application number is %4x",
369 (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
370 /* Wval is same as application number */
373 (((__u16) port->number - (__u16) (port->serial->minor)) +
375 dbg("mos7840_get_uart_reg application number is %x", Wval);
377 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
378 Wval = (((__u16) port->number -
380 dbg("mos7840_get_uart_reg application number is %x",
383 Wval = (((__u16) port->number -
385 dbg("mos7840_get_uart_reg application number is %x",
618 * Byte 1 IIR Port 1 (port.number is 0)
619 * Byte 2 IIR Port 2 (port.number is 1)
620 * Byte 3 IIR Port 3 (port.number is 2)
621 * Byte 4 IIR Port 4 (port.number is 3)
638 (((__u16) serial->port[i]->number -
868 * Otherwise we return a negative error number.
1097 dbg("port number is %d", port->number);
1098 dbg("serial number is %d", port->serial->minor);
1102 dbg("port's number in the device is %d", mos7840_port->port_num);
1155 * If successful, we return the number of bytes left to be written in the
1258 port0->open_ports, port->number);
1378 * Otherwise we return a negative error number.
1420 * If successful, we return the number of bytes written, otherwise we
1421 * return a negative error number.
1572 dbg("- port %d", port->number);
1660 dbg("%s - port %d", __func__, port->number);
1688 dbg("%s - port %d", __func__, port->number);
1804 unsigned char number;
1824 number = mos7840_port->port->number - mos7840_port->port->serial->minor;
1827 mos7840_port->port->number, baudRate);
1942 dbg("%s - port %d", __func__, mos7840_port->port->number);
1958 /* Change the number of bits */
2125 dbg("%s - port %d", __func__, port->number);
2197 tmp.port = mos7840_port->port->number;
2236 dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
2239 /* return number of bytes available */
2242 dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
2247 dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
2251 dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
2255 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
2302 port->number, icount.rx, icount.tx);
2379 dbg ("serial->port[i]->number = %d", serial->port[i]->number);