Lines Matching refs:__func__
319 __func__, serial->num_bulk_in,
332 __func__);
345 __func__, i);
357 if (serial_paranoia_check(serial, __func__))
409 dbg("Exit fail %s\n", __func__);
419 dbg("enterting %s", __func__);
456 if (port_paranoia_check(port, __func__))
459 dbg("%s(): port %d", __func__, port->number);
462 if (serial_paranoia_check(serial, __func__)) {
473 if (port_paranoia_check(port0, __func__)) {
588 __func__, result);
639 dbg("%s(): port %d", __func__, port->number);
647 dbg("%s(): port_extra->close_pending = true", __func__);
657 dbg("%s(): qt2_box_get_register failed", __func__);
670 __func__, port->number);
684 dbg("%s(): Exit, dev_extra->open_ports = %d", __func__,
708 __func__, port->number, count, port_extra->tx_pending_bytes);
711 dbg("%s(): write request of <= 0 bytes", __func__);
720 "-EINPROGRESS", __func__);
726 dbg("%s(): port transmit buffer is full!", __func__);
742 "%d bytes", __func__, count);
750 __func__, count);
764 dbg("%s(): first data byte to send = %#.2x", __func__, *buf);
778 __func__, result);
784 __func__, result, port_extra->tx_pending_bytes);
807 dbg("%s(): port_extra->close_pending == true", __func__);
831 dbg("%s(): port %d: write room is %d", __func__, port->number, room);
842 dbg("%s(): port %d: chars_in_buffer = %d", __func__,
873 dbg("%s(): port %d, UartNumber %d, tty =0x%p", __func__,
913 __func__, port->number);
920 __func__, port->number);
945 dbg("%s(): No ioctl for that one. port = %d", __func__,
962 dbg("%s(): port %d", __func__, port->number);
1014 dbg("%s(): got baud = %d", __func__, baud);
1022 __func__, divisor, QT2_MAX_BAUD_RATE, LCR_change_to);
1038 dbg("%s(): Enabling HW flow control port %d", __func__,
1048 dbg("%s(): disabling HW flow control port %d", __func__,
1087 dbg("%s(): port %d, tty =0x%p", __func__, port->number, tty);
1129 dbg("%s(): port %d, UartNumber %d", __func__, port->number, UartNumber);
1167 dbg("%s(): port %d: no serial object", __func__, port->number);
1175 dbg("%s(): port %d, break_value %d", __func__, port->number,
1180 dbg("%s(): port not open", __func__);
1189 dbg("%s(): exit port %d", __func__, port->number);
1200 dbg("%s(): port %d", __func__, port->number);
1204 dbg("%s(): enter port %d no serial object", __func__,
1211 dbg("%s(): port not open", __func__);
1225 dbg("%s(): port %d: setting port->throttled", __func__, port->number);
1242 dbg("%s() enter port %d no serial object!", __func__,
1246 dbg("%s(): enter port %d", __func__, port->number);
1253 dbg("%s(): port %d not open", __func__, port->number);
1258 dbg("%s(): port %d: unsetting port->throttled", __func__,
1276 dbg("%s(): exit port %d", __func__, port->number);
1309 dbg("%s(): Port = %d, PortSettings = 0x%x", __func__,
1442 dbg("%s(): callback running, active port is %d", __func__,
1449 __func__, urb->status);
1454 if (port_paranoia_check(port0, __func__) != 0) {
1456 __func__);
1459 if (port_paranoia_check(active, __func__) != 0) {
1461 "failed, exiting", __func__);
1481 dbg("%s - (active->close_pending == true", __func__);
1486 dbg("%s - (ReadBulkStopped == true;", __func__);
1514 dbg("%s - bad tty pointer - exiting", __func__);
1658 __func__, result);
1660 dbg("%s() successfully resubmitted read urb", __func__);
1673 dbg("%s() completed", __func__);
1687 dbg("%s(): port %d", __func__, port->number);
1689 dbg("%s(): bad serial pointer, exiting", __func__);
1694 __func__, urb->status);
1699 dbg("%s(): port %d exit", __func__, port->number);
1955 dbg("%s\n", __func__);