Lines Matching refs:dbg
156 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
238 dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
243 dbg("break!\n");
399 dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
414 dbg("requesting tx irq...\n");
428 dbg("s3c24xx_serial_startup ok\n");
690 dbg("selecting clock %p\n", clk);
710 dbg("fracval = %04x\n", udivslot);
713 dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
719 dbg("config: 5bits/char\n");
723 dbg("config: 6bits/char\n");
727 dbg("config: 7bits/char\n");
732 dbg("config: 8bits/char\n");
756 dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
766 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
1061 dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1084 dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
1089 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1101 dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
1120 dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
1151 dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
1156 dbg("%s: initialising port %p...\n", __func__, ourport);
1162 dbg("%s: adding port\n", __func__);
1231 dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
1322 dbg("s3c24xx_serial_get_options: port=%p\n"
1371 dbg("calculated baud %d\n", *baud);
1388 dbg("s3c24xx_serial_init_ports: initialising ports...\n");
1408 dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
1427 dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
1439 dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
1464 dbg("s3c24xx_serial_initconsole\n");