Lines Matching defs:baud
173 /* Disable baud generator. */
179 /* Lower and upper byte of baud rate generator divisor. */
881 /* Setup some valid baud rate */
1044 unsigned int iflag, unsigned long baud)
1052 if (baud >= 115200 && ZS_IS_IRDA(uap)) {
1060 switch (baud) {
1074 brg = BPS_TO_BRG(baud, ZS_CLOCK / 16);
1144 * Set the irda codec on the imac to the specified baud rate.
1146 static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
1151 switch (*baud) {
1185 *baud = 9600;
1258 *baud, version);
1280 unsigned long baud;
1290 /* Calc baud rate */
1291 baud = uart_get_baud_rate(port, termios, old, 1200, 4000000);
1292 pmz_debug("pmz: switch IRDA to %ld bauds\n", baud);
1294 pmz_irda_setup(uap, &baud);
1295 /* Set final baud rate */
1296 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1300 baud = uart_get_baud_rate(port, termios, old, 1200, 230400);
1301 pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
1314 uart_update_timeout(port, termios->c_cflag, baud);
1551 /* Setup some valid baud rate information in the register
1552 * shadows so we don't write crap there before baud rate is
2115 int baud = 38400;
2127 baud = 57600;
2159 uart_parse_options(options, &baud, &parity, &bits, &flow);
2161 return uart_set_options(port, co, baud, parity, bits, flow);