Lines Matching defs:baud
508 #define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
705 * @baud: baud rate to use
707 static int set_baud(struct ioc4_port *port, int baud)
715 divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
720 diff = actual_baud - baud;
857 /* Set the default baud */
1098 /* Use baud rate calculations based on detected PCI
1275 * can receive at the current baud rate in that interval
1279 * So .... timeout * baud / 10 / HZ / 4, with HZ = 100.
1307 * @baud: baud rate for the port
1315 int baud, int byte_size, int stop_bits, int parenb, int parodd)
1320 DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
1321 __func__, baud, byte_size, stop_bits, parenb, parodd));
1323 if (set_baud(port, baud))
1380 port->ip_baud = baud;
1386 port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
1687 int baud, bits;
1728 baud = uart_get_baud_rate(the_port, new_termios, old_termios,
1730 DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud));
1733 if (!baud)
1734 baud = 9600;
1738 the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
1768 "config_port(baud %d data %d stop %d p enable %d parity %d),"
1770 __func__, (void *)port, cflag, baud, new_data, new_stop,
1773 if ((config_port(port, baud, /* baud */