Lines Matching defs:set
661 * @type: which ireg set
704 * @port: port to set
741 * @set: set this port as current
743 static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set)
761 /* set local copy */
762 if (set) {
845 * and set rings to empty by making prod == cons
963 * @intrbits: bit pattern to set
1010 * which interrupt bits are set.
1249 /* Re-enable DMA, set default threshold to intr whenever there is
1256 * flag if it was set above
1276 * and set the rx threshold to that amount. There are 4 chars
1293 /* Now set the rx timeout to the given value
1504 * @set_on: set ?
1550 * set_mcr - set the master control reg
1595 * ioc4_set_proto - set the protocol for the port
1776 new_parity_enable, /* set parity */
1802 /* set the protocol - mapbase has the port type */
1805 /* set the speed of the serial port */
1820 /* ip_lock is set on the call here */
1924 /* ip_lock is set on call here */
1934 /* ip_lock is set on call here */
2456 * ic4_set_mctrl - set control lines (dtr, rts, etc)
2458 * @mctrl: Lines to set/unset
2567 * ic4_set_termios - set termios stuff