Lines Matching refs:HOSTNO
173 #define HOSTNO instance->host_no
519 printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
523 printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
678 SPRINTF("scsi%d: no currently connected command\n", HOSTNO);
682 SPRINTF("scsi%d: issue_queue\n", HOSTNO);
690 SPRINTF("scsi%d: disconnected_queue\n", HOSTNO);
773 " be incorrectly cleared.\n", HOSTNO);
959 MAIN_PRINTK( "scsi%d: not connected\n", HOSTNO );
1010 HOSTNO, tmp->target, tmp->lun);
1038 "returned to issue_queue\n", HOSTNO);
1052 HOSTNO);
1054 MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO);
1087 "no connected cmd\n", HOSTNO);
1092 HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
1096 printk("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n", HOSTNO);
1106 printk("scsi%d: BASR %02x\n", HOSTNO, NCR5380_read(BUS_AND_STATUS_REG));
1108 "overrun!\n", HOSTNO);
1150 INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO);
1154 INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
1161 INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
1166 INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO);
1170 INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO);
1190 INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
1201 HOSTNO, basr, NCR5380_read(MODE_REG),
1214 "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
1223 INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO);
1300 ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
1346 ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO);
1368 HOSTNO);
1383 HOSTNO);
1405 ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO);
1465 SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
1490 printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
1506 SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO);
1518 HOSTNO, cmd->device->id);
1537 SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO);
1581 HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO);
1585 PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
1626 HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO);
1647 PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c);
1750 printk("scsi%d: transfer_dma without setup!\n", HOSTNO);
1756 HOSTNO, (p & SR_IO) ? "reading" : "writing",
1864 "aborted\n", HOSTNO);
1887 HOSTNO, cmd->SCp.this_residual,
1920 "lun %d to slow handshake\n", HOSTNO,
1978 "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
1991 HOSTNO, cmd->device->id, cmd->device->lun);
2004 HOSTNO, cmd->device->id, cmd->device->lun);
2018 "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
2033 HOSTNO, cmd->device->id, cmd->device->lun,
2076 HOSTNO);
2130 HOSTNO, cmd->device->id, cmd->device->lun);
2146 "disconnected_queue\n", HOSTNO,
2197 EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO);
2203 EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO,
2216 HOSTNO, len);
2227 "extended message\n", HOSTNO);
2232 HOSTNO, extended_msg[2], extended_msg[1]);
2243 printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
2249 HOSTNO, tmp, cmd->device->id, cmd->device->lun);
2254 HOSTNO, extended_msg[1], extended_msg[0],
2299 printk("scsi%d: unknown phase\n", HOSTNO);
2342 RSL_PRINTK("scsi%d: reselect\n", HOSTNO);
2371 printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
2408 HOSTNO, target_mask, lun
2461 "reselection\n", HOSTNO, target_mask, lun, tag);
2467 HOSTNO, tmp->target, tmp->lun, tmp->tag);
2479 printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
2486 ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
2498 ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO);
2530 printk("scsi%d: abort of connected command failed!\n", HOSTNO);
2549 HOSTNO);
2569 ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO);
2602 ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO);
2607 ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO);
2646 printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);