Lines Matching defs:DEBC
68 #define DEBC(a) if (debugging) { a ; }
71 #define DEBC(a)
446 DEBC(printk(KERN_ERR "%s: Can't get SCSI request.\n",
669 DEBC(printk(ST_DEB_MSG "%s: Stepping over filemark %s.\n",
706 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
856 DEBC(printk(ST_DEB_MSG "%s: %socking drive door.\n", name,
992 DEBC(printk(ST_DEB_MSG "%s: Mode change from %d to %d.\n",
1069 DEBC(printk(ST_DEB_MSG "%s: Can't read block limits.\n",
1087 DEBC(printk(ST_DEB_MSG "%s: No Mode Sense.\n", name));
1092 DEBC(printk(ST_DEB_MSG
1103 DEBC(printk(ST_DEB_MSG
1122 DEBC(printk(ST_DEB_MSG
1130 DEBC(printk(ST_DEB_MSG "%s: Write protected\n", name));
1144 DEBC(printk(ST_DEB_MSG
1292 DEBC(printk(ST_DEB_MSG
1299 DEBC( if (STp->nbr_requests)
1306 DEBC(printk(ST_DEB_MSG "%s: Async write waits %d, finished %d.\n",
1346 DEBC(printk(ST_DEB_MSG "%s: Buffer flushed, %d EOF(s) written\n",
1721 DEBC(printk(ST_DEB_MSG "%s: Error on write:\n", name));
1748 DEBC(printk(ST_DEB_MSG
1763 DEBC(printk(ST_DEB_MSG
1776 DEBC(printk(ST_DEB_MSG
1890 DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1937 DEBC(printk(ST_DEB_MSG
1955 DEBC(printk(ST_DEB_MSG
1969 DEBC(printk(ST_DEB_MSG "%s: EOM detected (%d bytes read).\n",
1975 DEBC(printk(ST_DEB_MSG
1980 DEBC(printk(ST_DEB_MSG
2205 DEBC(printk(ST_DEB_MSG
2270 DEBC( printk(KERN_INFO "%s: Default block size disabled.\n", name));
2273 DEBC( printk(KERN_INFO "%s: Default block size set to %d bytes.\n",
2284 DEBC( printk(KERN_INFO "%s: Long timeout set to %d seconds.\n", name,
2289 DEBC( printk(KERN_INFO "%s: Normal timeout set to %d seconds.\n",
2310 DEBC( printk(KERN_INFO "%s: Density default disabled.\n",
2314 DEBC( printk(KERN_INFO "%s: Density default set to %x\n",
2324 DEBC( printk(KERN_INFO
2328 DEBC( printk(KERN_INFO
2337 DEBC( printk(KERN_INFO
2342 DEBC( printk(KERN_INFO "%s: Compression algorithm set to 0x%x.\n",
2347 DEBC( printk(KERN_INFO "%s: Compression default set to %x\n",
2472 DEBC(printk(ST_DEB_MSG "%s: Compression mode page not supported.\n",
2478 DEBC(printk(ST_DEB_MSG "%s: Compression state is %d.\n", name,
2483 DEBC(printk(ST_DEB_MSG "%s: Compression not supported.\n", name));
2501 DEBC(printk(ST_DEB_MSG "%s: Compression change failed.\n", name));
2504 DEBC(printk(ST_DEB_MSG "%s: Compression state changed to %d.\n",
2537 DEBC(printk(ST_DEB_MSG "%s: Enhanced %sload slot %2d.\n",
2549 DEBC(
2640 DEBC(deb_space_print(name, ST_DEB_FORWARD, "filemarks", cmd);)
2655 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "filemarks", cmd);)
2667 DEBC(deb_space_print(name, ST_DEB_FORWARD, "blocks", cmd);)
2679 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "blocks", cmd);)
2690 DEBC(deb_space_print(name, ST_DEB_FORWARD, "setmarks", cmd);)
2703 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "setmarks", cmd);)
2720 DEBC(
2739 DEBC(printk(ST_DEB_MSG "%s: Rewinding tape.\n", name));
2743 DEBC(printk(ST_DEB_MSG "%s: No op on tape.\n", name));
2753 DEBC(printk(ST_DEB_MSG "%s: Retensioning tape.\n", name));
2771 DEBC(printk(ST_DEB_MSG "%s: Spacing to end of recorded medium.\n",
2788 DEBC(printk(ST_DEB_MSG "%s: Erasing tape.\n", name));
2836 DEBC(
3032 DEBC(printk(ST_DEB_MSG "%s: Can't read tape position.\n", name));
3051 DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name,
3079 DEBC(printk(ST_DEB_MSG "%s: Setting block to %d and partition to %d.\n",
3094 DEBC(printk(ST_DEB_MSG
3118 DEBC(printk(ST_DEB_MSG
3220 DEBC(printk(ST_DEB_MSG "%s: Can't read medium partition page.\n",
3226 DEBC(printk(ST_DEB_MSG "%s: Number of partitions %d.\n", name, result));
3261 DEBC(printk(ST_DEB_MSG "%s: Can't read partition mode page.\n", name));
3267 DEBC(printk(ST_DEB_MSG "%s: Partition page length is %d bytes.\n",
3278 DEBC(printk("%s: psd_cnt %d, max.parts %d, nbr_parts %d\n", name,
3286 DEBC(printk(ST_DEB_MSG "%s: Formatting tape with one partition.\n",
3294 DEBC(printk(ST_DEB_MSG