Lines Matching defs:port_base
360 int port_base = dev->io_port;
370 REG1(port_base);
371 pio_status = inb(port_base + PIO_STATUS);
372 REG0(port_base);
373 status = inb(port_base + STAT_REG);
374 DEB(seq_reg = inb(port_base + SEQ_REG));
375 int_reg = inb(port_base + INT_REG);
376 DEB(fifo_size = inb(port_base + FIFO_FLAGS) & 0x1f);
427 outb(FLUSH_FIFO, port_base + CMD_REG);
428 LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC)); /* Max transfer size */
429 outb(TRANSFER_INFO | DMA_OP, port_base + CMD_REG);
432 SYM53C500_pio_write(fast_pio, port_base,
435 REG0(port_base);
446 outb(FLUSH_FIFO, port_base + CMD_REG);
447 LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC)); /* Max transfer size */
448 outb(TRANSFER_INFO | DMA_OP, port_base + CMD_REG);
451 SYM53C500_pio_read(fast_pio, port_base,
454 REG0(port_base);
466 outb(FLUSH_FIFO, port_base + CMD_REG);
467 outb(INIT_CMD_COMPLETE, port_base + CMD_REG);
478 outb(SET_ATN, port_base + CMD_REG); /* Reject the message */
479 outb(MSG_ACCEPT, port_base + CMD_REG);
486 curSC->SCp.Status = inb(port_base + SCSI_FIFO);
487 curSC->SCp.Message = inb(port_base + SCSI_FIFO);
489 VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f));
493 outb(SET_ATN, port_base + CMD_REG); /* Reject message */
496 outb(MSG_ACCEPT, port_base + CMD_REG);
554 int port_base = SCpnt->device->host->io_port;
575 REG0(port_base);
576 outb(scmd_id(SCpnt), port_base + DEST_ID); /* set destination */
577 outb(FLUSH_FIFO, port_base + CMD_REG); /* reset the fifos */
580 outb(SCpnt->cmnd[i], port_base + SCSI_FIFO);
582 outb(SELECT_NO_ATN, port_base + CMD_REG);
590 int port_base = SCpnt->device->host->io_port;
594 SYM53C500_int_host_reset(port_base);
708 int irq_level, port_base;
747 * Possible port_base values are as follows:
752 port_base = link->resource[0]->start;
755 DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
756 port_base, irq_level, USE_FAST_PIO);)
758 chip_init(port_base);
782 host->unique_id = port_base;
784 host->io_port = port_base;
808 release_region(port_base, 0x10);