Lines Matching defs:nsp_dbg
104 # define nsp_dbg(mask, args...) /* */
109 # define nsp_dbg(mask, args...) \
198 nsp_dbg(NSP_DEBUG_QUEUECOMMAND,
202 //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC);
244 nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail");
251 //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "out");
266 //nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled);
300 nsp_dbg(NSP_DEBUG_INIT, "in base=0x%x", base);
363 //nsp_dbg(NSP_DEBUG_RESELECTION, "in");
367 //nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy");
372 //nsp_dbg(NSP_DEBUG_RESELECTION, "start arbit");
379 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit=%d, wait_count=%d", arbit, wait_count);
385 //nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail");
391 //nsp_dbg(NSP_DEBUG_RESELECTION, "assert SEL line");
445 nsp_dbg(NSP_DEBUG_SYNC, "in");
450 nsp_dbg(NSP_DEBUG_SYNC, "period=0x%x, offset=0x%x", period, offset);
469 nsp_dbg(NSP_DEBUG_SYNC, "no proper period/offset");
483 nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth);
497 //nsp_dbg(NSP_DEBUG_INTR, "in SCpnt=0x%p, time=%d", SCpnt, time);
512 //nsp_dbg(NSP_DEBUG_INTR, "in");
541 //nsp_dbg(NSP_DEBUG_INTR, "current_phase=0x%x, mask=0x%x", current_phase, mask);
547 //nsp_dbg(NSP_DEBUG_INTR, "ret -1");
552 //nsp_dbg(NSP_DEBUG_INTR, "ret 0 found scsi signal");
556 //nsp_dbg(NSP_DEBUG_INTR, "ret 1 phase=0x%x", phase);
561 //nsp_dbg(NSP_DEBUG_INTR, "timeout");
577 //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
582 nsp_dbg(NSP_DEBUG_DATA_IO, "xfer quit");
593 nsp_dbg(NSP_DEBUG_DATA_IO, "read msg");
596 nsp_dbg(NSP_DEBUG_DATA_IO, "write msg");
613 //nsp_dbg(NSP_DEBUG_DATA_IO, "in");
621 //nsp_dbg(NSP_DEBUG_DATA_IO, "not use bypass quirk");
625 nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk");
645 nsp_dbg(NSP_DEBUG_RESELECTION, "in");
690 //nsp_dbg(NSP_DEBUG_DATA_IO, "count=0x%x", count);
713 nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d",
728 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
731 //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
734 nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x", stat);
762 nsp_dbg(NSP_DEBUG_DATA_IO, "unknown read mode");
770 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this_residual=0x%x ocount=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount);
775 //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next timeout=%d", time_out);
782 //nsp_dbg(NSP_DEBUG_DATA_IO, "page: 0x%p, off: 0x%x", SCpnt->SCp.buffer->page, SCpnt->SCp.buffer->offset);
793 nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount);
794 nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId,
812 nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x",
827 nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res);
839 nsp_dbg(NSP_DEBUG_DATA_IO, "wait for all data out. ocount=0x%x res=%d", ocount, res);
845 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, res);
861 nsp_dbg(NSP_DEBUG_DATA_IO, "unknown write mode");
873 //nsp_dbg(NSP_DEBUG_DATA_IO, "scatterlist next");
888 nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount);
889 nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId,
906 //nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p", SCpnt);
951 //nsp_dbg(NSP_DEBUG_INTR, "dev_id=0x%p", dev_id);
952 //nsp_dbg(NSP_DEBUG_INTR, "host=0x%p", ((scsi_info_t *)dev_id)->host);
960 nsp_dbg(NSP_DEBUG_INTR, "host data wrong");
964 //nsp_dbg(NSP_DEBUG_INTR, "&nsp_data_base=0x%p, dev_id=0x%p", &nsp_data_base, dev_id);
967 //nsp_dbg(NSP_DEBUG_INTR, "base=0x%x", base);
974 //nsp_dbg(NSP_DEBUG_INTR, "irq_status=0x%x", irq_status);
977 //nsp_dbg(NSP_DEBUG_INTR, "no irq/shared irq");
988 //nsp_dbg(NSP_DEBUG_INTR, "irq_phase=0x%x", irq_phase);
993 //nsp_dbg(NSP_DEBUG_INTR, "timercount=%d", data->TimerCount);
995 //nsp_dbg(NSP_DEBUG_INTR, "stop timer");
1003 //nsp_dbg(NSP_DEBUG_INTR, "timer start");
1044 nsp_dbg(NSP_DEBUG_INTR, "reselect");
1062 //nsp_dbg(NSP_DEBUG_INTR, "selection count=%d", data->SelectionTimeOut);
1064 nsp_dbg(NSP_DEBUG_INTR, "selection time out");
1079 //nsp_dbg(NSP_DEBUG_INTR, "attention assert");
1090 //nsp_dbg(NSP_DEBUG_INTR, "phase reselect");
1109 //nsp_dbg(NSP_DEBUG_INTR, "start scsi seq");
1114 nsp_dbg(NSP_DEBUG_INTR, "normal disconnect irq_status=0x%x, phase=0x%x, irq_phase=0x%x", irq_status, phase, irq_phase);
1122 nsp_dbg(NSP_DEBUG_INTR, "command complete result=0x%x", tmpSC->result);
1144 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_COMMAND");
1146 nsp_dbg(NSP_DEBUG_INTR, "REQ == 0");
1155 nsp_dbg(NSP_DEBUG_INTR, "cmd_len=%d", tmpSC->cmd_len);
1164 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_OUT");
1174 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_DATA_IN");
1185 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_STATUS");
1190 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x status=0x%x", tmpSC->SCp.Message, tmpSC->SCp.Status);
1195 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_OUT");
1228 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE_MESSAGE_IN");
1238 //nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun);
1246 //nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]);
1267 nsp_dbg(NSP_DEBUG_INTR, "message=0x%x len=%d", tmpSC->SCp.Message, data->MsgLen);
1274 nsp_dbg(NSP_DEBUG_INTR, "BUSPHASE other");
1279 //nsp_dbg(NSP_DEBUG_INTR, "out");
1299 nsp_dbg(NSP_DEBUG_INIT, "this_id=%d", sht->this_id);
1302 nsp_dbg(NSP_DEBUG_INIT, "host failed");
1313 nsp_dbg(NSP_DEBUG_INIT, "irq=%d,%d", data_b->IrqNumber, ((nsp_hw_data *)host->hostdata)->IrqNumber);
1331 nsp_dbg(NSP_DEBUG_INIT, "end");
1352 nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\
1464 nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1494 nsp_dbg(NSP_DEBUG_BUSRESET, "SCpnt=0x%p", SCpnt);
1503 nsp_dbg(NSP_DEBUG_BUSRESET, "in");
1530 nsp_dbg(NSP_DEBUG_INIT, "in");
1539 nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
1551 nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1564 nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
1668 nsp_dbg(NSP_DEBUG_INIT, "next");
1681 nsp_dbg(NSP_DEBUG_INIT, "in");
1715 nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
1725 nsp_dbg(NSP_DEBUG_INIT, "detect failed");
1760 nsp_dbg(NSP_DEBUG_INIT, "config fail");
1784 nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
1808 nsp_dbg(NSP_DEBUG_INIT, "event: suspend");
1828 nsp_dbg(NSP_DEBUG_INIT, "event: resume");