Lines Matching defs:bat
59 struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
61 if (!bat) {
66 if (bat->volt_value < 0 ||
67 jiffies_to_msecs(jiffies - bat->timestamp) >
69 bat->volt_value = s3c_adc_read(bat->client,
70 bat->pdata->backup_volt_channel);
71 bat->volt_value *= bat->pdata->backup_volt_mult;
72 bat->timestamp = jiffies;
77 val->intval = bat->volt_value;
80 val->intval = bat->pdata->backup_volt_min;
83 val->intval = bat->pdata->backup_volt_max;
119 struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy);
123 const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac;
124 unsigned int lut_size = bat->pdata->lut_noac_cnt;
126 if (!bat) {
131 if (bat->volt_value < 0 || bat->cur_value < 0 ||
132 jiffies_to_msecs(jiffies - bat->timestamp) >
134 bat->volt_value = s3c_adc_read(bat->client,
135 bat->pdata->volt_channel) * bat->pdata->volt_mult;
136 bat->cur_value = s3c_adc_read(bat->client,
137 bat->pdata->current_channel) * bat->pdata->current_mult;
138 bat->timestamp = jiffies;
141 if (bat->cable_plugged &&
142 ((bat->pdata->gpio_charge_finished < 0) ||
143 !gpio_get_value(bat->pdata->gpio_charge_finished))) {
144 lut = bat->pdata->lut_acin;
145 lut_size = bat->pdata->lut_acin_cnt;
149 full_volt = calc_full_volt((bat->volt_value / 1000),
150 (bat->cur_value / 1000), bat->pdata->internal_impedance);
153 bat->pdata->internal_impedance)) {
160 bat->pdata->internal_impedance);
162 bat->pdata->internal_impedance);
175 bat->level = new_level;
179 if (bat->pdata->gpio_charge_finished < 0)
180 val->intval = bat->level == 100000 ?
181 POWER_SUPPLY_STATUS_FULL : bat->status;
183 val->intval = bat->status;
192 val->intval = bat->level;
195 val->intval = bat->volt_value;
198 val->intval = bat->cur_value;
219 struct s3c_adc_bat *bat = &main_bat;
224 is_plugged = power_supply_am_i_supplied(&bat->psy);
225 bat->cable_plugged = is_plugged;
229 if (bat->pdata->enable_charger)
230 bat->pdata->enable_charger();
231 bat->status = POWER_SUPPLY_STATUS_CHARGING;
233 if (bat->pdata->disable_charger)
234 bat->pdata->disable_charger();
235 bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
238 if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) {
242 if (bat->pdata->disable_charger)
243 bat->pdata->disable_charger();
244 bat->status = POWER_SUPPLY_STATUS_FULL;
246 if (bat->pdata->enable_charger)
247 bat->pdata->enable_charger();
248 bat->status = POWER_SUPPLY_STATUS_CHARGING;
253 power_supply_changed(&bat->psy);