Lines Matching refs:ULI526X_DBUG
86 #define ULI526X_DBUG(dbug_now, msg, value) \
283 ULI526X_DBUG(0, "uli526x_init_one()", 0);
426 ULI526X_DBUG(0, "uli526x_remove_one()", 0);
438 ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
452 ULI526X_DBUG(0, "uli526x_open", 0);
507 ULI526X_DBUG(0, "uli526x_init()", 0);
586 ULI526X_DBUG(0, "uli526x_start_xmit", 0);
651 ULI526X_DBUG(0, "uli526x_stop", 0);
703 ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
824 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
870 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
891 ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
895 ULI526X_DBUG(0, "Enable PROM Mode", 0);
904 ULI526X_DBUG(0, "Pass all multicast address",
912 ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
1021 //ULI526X_DBUG(0, "uli526x_timer()", 0);
1048 ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
1063 ULI526X_DBUG(0, "Link Failed", tmp_cr12);
1080 ULI526X_DBUG(0, "Link link OK", tmp_cr12);
1165 ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
1189 ULI526X_DBUG(0, "uli526x_suspend", 0);
1225 ULI526X_DBUG(0, "uli526x_resume", 0);
1264 ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
1294 ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
1312 ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
1394 ULI526X_DBUG(0, "send_filter_frame()", 0);
1545 ULI526X_DBUG(0, "Link Failed :", phy_mode);
1827 ULI526X_DBUG(0, "init_module() ", debug);
1858 ULI526X_DBUG(0, "uli526x_clean_module() ", debug);