Lines Matching refs:Parm
331 tp->scb.Parm[0] = 0;
332 tp->scb.Parm[1] = 0;
335 tp->ssb.Parm[0] = 0;
336 tp->ssb.Parm[1] = 0;
337 tp->ssb.Parm[2] = 0;
717 if(tp->ssb.Parm[0] & COMMAND_COMPLETE) {
789 ssb->Parm[0] = (unsigned short) -1;
790 ssb->Parm[1] = (unsigned short) -1;
791 ssb->Parm[2] = (unsigned short) -1;
844 if(ssb->Parm[0] == (unsigned short) -1)
850 if(ssb->Parm[1] == (unsigned short) -1)
852 if(ssb->Parm[2] == (unsigned short) -1)
871 ssb_parm_0 = tp->ssb.Parm[0];
872 ssb_parm_1 = tp->ssb.Parm[1];
1476 tp->scb.Parm[0] = LOWORD(Addr);
1477 tp->scb.Parm[1] = HIWORD(Addr);
1496 tp->scb.Parm[0] = 0; /* Parm[0], Parm[1] are ignored */
1497 tp->scb.Parm[1] = 0; /* but should be set to zero! */
1510 tp->scb.Parm[0] = LOWORD(Addr);
1511 tp->scb.Parm[1] = HIWORD(Addr);
1524 /* Parm[0] and Parm[1] are ignored
1527 tp->scb.Parm[0] = 0;
1528 tp->scb.Parm[1] = 0;
1551 tp->scb.Parm[0] = LOWORD(Addr);
1552 tp->scb.Parm[1] = HIWORD(Addr);
1561 tp->scb.Parm[0] = tp->ocpl.OPENOptions; /* new OPEN options*/
1562 tp->scb.Parm[0] |= ENABLE_FULL_DUPLEX_SELECTION;
1563 tp->scb.Parm[1] = 0; /* is ignored but should be zero */
1571 tp->scb.Parm[0] = LOWORD(tp->ocpl.FunctAddr);
1572 tp->scb.Parm[1] = HIWORD(tp->ocpl.FunctAddr);
1580 tp->scb.Parm[0] = LOWORD(tp->ocpl.GroupAddr);
1581 tp->scb.Parm[1] = HIWORD(tp->ocpl.GroupAddr);
1590 tp->scb.Parm[0] = LOWORD(Addr);
1591 tp->scb.Parm[1] = HIWORD(Addr);
1627 tp->CurrentRingStatus = be16_to_cpu((unsigned short)tp->ssb.Parm[0]);
1630 if(tp->ssb.Parm[0] & SIGNAL_LOSS)
1637 if(tp->ssb.Parm[0] & LOBE_WIRE_FAULT)
1644 if(tp->ssb.Parm[0] & RING_RECOVERY)
1648 if(tp->ssb.Parm[0] & COUNTER_OVERFLOW)
1655 if(tp->ssb.Parm[0] & REMOVE_RECEIVED)
1660 if(tp->ssb.Parm[0] & AUTO_REMOVAL_ERROR)
1664 if(tp->ssb.Parm[0] & HARD_ERROR)
1667 if(tp->ssb.Parm[0] & SOFT_ERROR)
1670 if(tp->ssb.Parm[0] & TRANSMIT_BEACON)
1673 if(tp->ssb.Parm[0] & SINGLE_STATION)
1677 if(tp->ssb.Parm[0] & ADAPTER_CLOSED)
1789 /* Parm[0-3]: adapter internal register R13-R15 */
1795 /* Parm[0-3]: adapter internal register R13-R15 */
1800 /* Parm[0-1]: MSW/LSW address of RAM location. */
1805 /* Parm[0-1]: MSW/LSW address of RAM location. */
1816 /* Parm[0-3]: adapter internal register R13-R15 */
1822 /* Parm[0-3]: adapter internal register R13-R15 */
1828 /* Parm[0-3]: adapter internal register R13-R15 */