Lines Matching refs:DBG_PRINT
656 DBG_PRINT(ERR_DBG,
671 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
689 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n");
716 DBG_PRINT(INFO_DBG,
727 DBG_PRINT(INIT_DBG,
734 DBG_PRINT(INFO_DBG,
771 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
926 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
992 DBG_PRINT(INIT_DBG,
1129 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1164 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
1272 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");
1394 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1704 DBG_PRINT(ERR_DBG,
1783 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
2189 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
2193 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
2197 DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
2201 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
2205 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
2209 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
2213 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
2217 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
2229 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
2234 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
2339 DBG_PRINT(ERR_DBG, "%s: device is not ready, "
2454 DBG_PRINT(INTR_DBG,
2547 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
2560 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2583 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
2806 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
2814 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
2938 DBG_PRINT(INFO_DBG,
2985 DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
2991 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
3125 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
3264 DBG_PRINT(ERR_DBG,
3266 DBG_PRINT(ERR_DBG,
3270 DBG_PRINT(ERR_DBG,
3272 DBG_PRINT(ERR_DBG,
3276 DBG_PRINT(ERR_DBG,
3278 DBG_PRINT(ERR_DBG,
3282 DBG_PRINT(ERR_DBG,
3319 DBG_PRINT(ERR_DBG,
3327 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
3480 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
3503 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);
3618 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
3649 DBG_PRINT(ERR_DBG,
3710 DBG_PRINT(ERR_DBG,
3733 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3756 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3778 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3804 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3814 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3851 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
3896 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3914 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3992 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
3998 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
4092 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4095 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
4101 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4174 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4281 DBG_PRINT(TX_DBG,
5062 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5084 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
5091 DBG_PRINT(ERR_DBG,
5117 DBG_PRINT(ERR_DBG,
5149 DBG_PRINT(ERR_DBG,
5219 DBG_PRINT(ERR_DBG,
5246 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5270 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5290 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5355 DBG_PRINT(INFO_DBG,
5362 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5586 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
5830 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5893 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5925 DBG_PRINT(ERR_DBG,
5941 DBG_PRINT(ERR_DBG,
5975 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
5981 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
5991 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
5997 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
6005 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
6013 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
6061 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
6083 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6331 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",
6827 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);
6837 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6905 DBG_PRINT(ERR_DBG,
6947 DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6957 DBG_PRINT(INFO_DBG,
6986 DBG_PRINT(INFO_DBG,
7110 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
7149 DBG_PRINT(ERR_DBG,
7161 DBG_PRINT(ERR_DBG,
7165 DBG_PRINT(ERR_DBG,
7177 DBG_PRINT(INFO_DBG,
7185 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7258 DBG_PRINT(ERR_DBG, "Device not Quiescent - "
7292 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7313 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7319 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7354 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7409 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);
7412 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
7525 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7605 DBG_PRINT(ERR_DBG,
7651 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7659 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7706 DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
7714 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
7722 DBG_PRINT(ERR_DBG,
7730 DBG_PRINT(ERR_DBG,
7732 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
7737 DBG_PRINT(ERR_DBG,
7739 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
7745 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
7753 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
7759 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
7760 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
7852 DBG_PRINT(ERR_DBG,
7858 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
7861 DBG_PRINT(ERR_DBG,
7868 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
7875 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
7885 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
8015 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);
8022 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
8030 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
8069 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
8079 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
8097 DBG_PRINT(ERR_DBG,
8204 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8209 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");
8210 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,
8212 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8214 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
8215 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
8226 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8230 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8237 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
8240 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8244 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8247 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8252 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8255 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8264 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8267 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8272 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",
8276 DBG_PRINT(ERR_DBG,
8281 DBG_PRINT(ERR_DBG,
8287 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8290 DBG_PRINT(ERR_DBG,
8342 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8379 DBG_PRINT(INIT_DBG, "cleanup done\n");
8393 DBG_PRINT(INIT_DBG,
8425 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8443 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8474 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8502 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8526 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8594 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr);
8608 DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
8648 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
8670 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);