Lines Matching defs:link
233 /* check for link */
637 bool link;
670 e_dbg("Waiting for forced speed/duplex link "
674 100000, &link);
678 if (!link) {
680 * We didn't get link.
690 100000, &link);
701 * to the link speed. 10Mbps -> 2.5MHz, else 25MHz.
832 * Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
861 /* Setup link and flow control */
912 * important that we do this after we have tried to establish link
914 * is no link.
961 * Setup some GG82563 PHY registers for obtaining link
975 /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
1160 * e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
1370 * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
1373 * In the case of a PHY power down to save power, or to turn off link during a
1374 * driver unload, or wake on lan is not enabled, remove the link.