Lines Matching defs:link
412 /* fire a link change interrupt to start the watchdog */
418 * e1000_power_up_phy - restore link in case the phy was powered down
421 * The phy may be powered down to save power and turn off link when the
446 /* Power down the PHY so no link is implied when interface is down *
674 * can cause a loss of link at power off or driver unload */
1300 /* fire a link status change interrupt to start the watchdog */
2209 /* Need to wait a few seconds after link up to get diagnostic information from
2258 /* get_link_status is set on LSC (link status) interrupt or
2260 * false until the e1000_check_for_link establishes link
2297 u32 link, tctl;
2299 link = e1000_has_link(adapter);
2300 if ((netif_carrier_ok(netdev)) && link)
2303 if (link) {
2381 /* We've lost link, so the controller stops DMA,
4182 /* If still no link, perhaps using 2/3 pair cable */