Lines Matching defs:set
92 * t3_set_reg_field - set a register field to a value
321 * @set: what part of the register value to set
327 unsigned int set)
335 ret = t3_mdio_write(phy, mmd, reg, val | set);
373 * t3_phy_advertise - set the PHY advertisement registers for autoneg
416 * t3_phy_advertise_fiber - set fiber PHY advertisement register
609 * set the flag to 1 when 4 bytes have been read into the data register.
839 * If @byte_oriented is set the read data is stored as a byte array
1324 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
1389 * A table driven interrupt handler that applies a set of masks to an
2820 * tp_set_timers - set TP timing parameters
2821 * @adap: the adapter to set
2864 * t3_tp_set_coalescing_size - set receive coalescing size
2867 * @psh: whether a set PSH bit should deliver coalesced data
2894 * t3_tp_set_max_rxsize - set the max receive size
3101 * t3_set_proto_sram - set the contents of the protocol sram
3714 t3_write_reg(adapter, A_I2C_CFG, /* set for 80KHz */
3796 * Initialize adapter SW state for the various HW modules, set initial values