Lines Matching refs:BNX2X_DEV_INFO
5873 BNX2X_DEV_INFO("UNDI is active! reset device\n");
5967 BNX2X_DEV_INFO("chip ID is 0x%x\n", id);
5973 BNX2X_DEV_INFO("single port device\n");
5979 BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
5985 BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
5991 BNX2X_DEV_INFO("MCP not active\n");
6002 BNX2X_DEV_INFO("hw_config 0x%08x\n", bp->common.hw_config);
6019 BNX2X_DEV_INFO("bc_ver %X\n", val);
6037 BNX2X_DEV_INFO("%sWoL capable\n",
6057 BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg);
6063 BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
6080 BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n",
6104 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
6108 BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg);
6114 BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
6132 BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
6144 BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
6157 BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
6167 BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
6178 BNX2X_DEV_INFO("ext_phy_type 0x%x (8726)\n",
6190 BNX2X_DEV_INFO("ext_phy_type 0x%x (8727)\n",
6202 BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
6213 BNX2X_DEV_INFO("ext_phy_type 0x%x (BCM8481)\n",
6242 BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
6283 BNX2X_DEV_INFO("supported 0x%x\n", bp->port.supported);
6442 BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
6511 BNX2X_DEV_INFO("lane_config 0x%08x ext_phy_config 0x%08x"
6567 BNX2X_DEV_INFO("%s function mode\n",
6576 BNX2X_DEV_INFO("E1HOV for func %d is %d "
6598 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
7585 BNX2X_DEV_INFO("shmem offset is 0x%x\n", bp->common.shmem_base);
7590 BNX2X_DEV_INFO("MCP not active\n");
7603 BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);