Lines Matching refs:board
16 The CCAT91SBC001 board does not support SD cards.
78 #include <mach/board.h>
122 struct at91_mmc_data *board;
421 at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
727 if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
740 if (host->board->vcc_pin) {
743 gpio_set_value(host->board->vcc_pin, 0);
746 gpio_set_value(host->board->vcc_pin, 1);
892 if (host->board->wp_pin)
893 return !!gpio_get_value(host->board->wp_pin);
906 host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
908 host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
959 host->board = pdev->dev.platform_data;
960 if (host->board->wire4) {
979 if (host->board->wire4 || !host->board->slot_b)
984 * Reserve GPIOs ... board init code makes sure these pins are set
987 if (host->board->det_pin) {
988 ret = gpio_request(host->board->det_pin, "mmc_detect");
994 if (host->board->wp_pin) {
995 ret = gpio_request(host->board->wp_pin, "mmc_wp");
1001 if (host->board->vcc_pin) {
1002 ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
1053 if (host->board->det_pin) {
1054 host->present = !gpio_get_value(host->board->det_pin);
1064 if (host->board->det_pin) {
1065 ret = request_irq(gpio_to_irq(host->board->det_pin),
1083 if (host->board->vcc_pin)
1084 gpio_free(host->board->vcc_pin);
1086 if (host->board->wp_pin)
1087 gpio_free(host->board->wp_pin);
1089 if (host->board->det_pin)
1090 gpio_free(host->board->det_pin);
1121 if (host->board->det_pin) {
1123 free_irq(gpio_to_irq(host->board->det_pin), host);
1125 gpio_free(host->board->det_pin);
1136 if (host->board->vcc_pin)
1137 gpio_free(host->board->vcc_pin);
1138 if (host->board->wp_pin)
1139 gpio_free(host->board->wp_pin);
1159 if (host->board->det_pin && device_may_wakeup(&pdev->dev))
1160 enable_irq_wake(host->board->det_pin);
1174 if (host->board->det_pin && device_may_wakeup(&pdev->dev))
1175 disable_irq_wake(host->board->det_pin);