Lines Matching refs:SAS
96 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
359 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
490 else if (ioc->bus_type == SAS)
1878 ioc->bus_type = SAS;
1884 ioc->bus_type = SAS;
1891 case SAS:
2131 if (ioc->bus_type == SAS && (pdev->device ==
2165 ioc->bus_type != SAS))
2459 case SAS:
3205 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3384 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3697 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3725 if (ioc->bus_type == SAS) {
3740 if (ioc->bus_type == SAS) {
4293 else if (ioc->bus_type == SAS)
4925 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
6548 if (!sas++) drvname = "SAS host";
7239 "SAS Device Status Change: Added: "
7244 "SAS Device Status Change: Deleted: "
7249 "SAS Device Status Change: SMART Data: "
7254 "SAS Device Status Change: No Persistancy: "
7259 "SAS Device Status Change: Unsupported Device "
7264 "SAS Device Status Change: Internal Device "
7269 "SAS Device Status Change: Internal Task "
7274 "SAS Device Status Change: Internal Abort "
7279 "SAS Device Status Change: Internal Clear "
7284 "SAS Device Status Change: Internal Query "
7289 "SAS Device Status Change: Unknown: "
7310 ds = "SAS SES Event";
7324 "SAS PHY Link Status: Phy=%d:"
7329 "SAS PHY Link Status: Phy=%d:"
7334 "SAS PHY Link Status: Phy=%d:"
7339 "SAS PHY Link Status: Phy=%d:"
7344 "SAS PHY Link Status: Phy=%d:"
7349 "SAS PHY Link Status: Phy=%d:"
7354 "SAS PHY Link Status: Phy=%d", PhyNumber);
7360 ds = "SAS Discovery Error";
7440 ds = "SAS Discovery: Start";
7442 ds = "SAS Discovery: Stop";
7446 ds = "SAS Log Entry Added";
7456 "SAS Broadcase Primative: phy=%d port=%d "
7468 ds = "SAS Initiator Status Change: Added";
7471 ds = "SAS Initiator Status Change: Deleted";
7474 ds = "SAS Initiator Status Change";
7486 "SAS Initiator Device Table Overflow: max initiators=%02d "
7499 "SAS SMP Error: port=%d result=0x%02x",
7503 "SAS SMP Error: port=%d : CRC Error",
7507 "SAS SMP Error: port=%d : Timeout",
7511 "SAS SMP Error: port=%d : No Destination",
7515 "SAS SMP Error: port=%d : Bad Destination",
7519 "SAS SMP Error: port=%d : status=0x%02x",
7797 "Invalid SAS Address", /* 01h */
7934 * mpt_sas_log_info - Log information returned from SAS IOC.
7959 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8159 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8301 desc = "SAS: SMP Request Failed";
8305 desc = "SAS: SMP Data Overrun";