Lines Matching defs:DEV_LABEL
164 #define DEV_LABEL "lanai"
169 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
173 printk(KERN_ERR DEV_LABEL ": " format, ##args); \
185 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
562 printk(KERN_ERR DEV_LABEL
810 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
865 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
936 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
979 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
986 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
994 printk(KERN_ERR DEV_LABEL
1006 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
1016 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
1023 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
1084 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
1105 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
1114 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
1125 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
1270 printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
1361 printk(KERN_INFO DEV_LABEL
1368 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
1413 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
1437 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
1504 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
1576 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not "
1697 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
1841 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
1850 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
1858 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
1863 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1870 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1935 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
1953 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
1959 printk(KERN_WARNING DEV_LABEL
1964 printk(KERN_WARNING DEV_LABEL
1970 printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
1980 printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
2166 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
2224 DEV_LABEL, lanai)) != 0) {
2225 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
2243 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
2249 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
2278 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
2354 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
2475 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
2589 printk(KERN_ERR DEV_LABEL
2594 atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
2596 printk(KERN_ERR DEV_LABEL
2623 .name = DEV_LABEL,
2634 printk(KERN_ERR DEV_LABEL ": no adapter found\n");