Lines Matching refs:we
9 * If any of the checksums fail, we assume the flash is so
10 * corrupt that we cant use it to boot into the ftp flash
11 * loader, and instead we initialize the serial port to
12 * receive a flash-loader and new flash image. we dont include
20 * data so we can add stuff later.
71 ;; sector. Sector size is 65536 bytes in all flashes we use.
77 ;; That is not where we put our downloaded serial boot-code.
123 ;; Since etrax actually starts at address 2 when booting from flash, we
124 ;; put a nop (2 bytes) here first so we dont accidentally skip the di
135 ;; We put a longword of -1 here and if it is not -1, we jump using
136 ;; the value as jump target. Since we can always change 1's to 0's
157 ;; We need to setup the bus registers before we start using the DRAM
160 ;; we now should go through the checksum-table and check the listed
232 ;; (so we can flash LEDs, and so that DTR and others are set)
289 ;; check if we got something on the serial port
336 btstq 26, $r1 ; Are we addressing first flash?