Lines Matching refs:We
71 % We never want plain's \outer definition of \+ in Texinfo.
212 % We want to insert a rule with the height and depth of the current
230 % and nothing on the terminal. We don't just call \tracingall here,
231 % since that produces some useless output on the terminal. We also make
281 % We dump everything together because we only have one kind of mark.
354 % We don't want .vr (or whatever) entries like this:
386 % (We lessened \vsize for it in \oddfootingyyy.)
486 % We prepended an \empty token at the very beginning and we expand it now,
728 % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
755 % end-of-line in the output. We don't want the end-of-line after
998 % We'll use ems for NCHARS, close enough.
1000 % We cannot feasibly implement @paragraphindent asis, though.
1019 % We'll use ems for NCHARS like @paragraphindent.
1041 % We switch the definition of this back and forth according to WORD.
1062 % We also make \indent itself not actually do anything until the next
1122 % We have to reset their definitions in case the @math was an argument
1143 % We do .5em per period so that it has the same spacing in the cm
1399 % We have to set dummies so commands such as @code, and characters
1435 % page number. We could generate a destination for the section
1498 % We use the node names as the destinations.
1616 % We don't need math for this font style.
2207 % We provide the user-level command
2245 % of just \STYLE. We do this because \STYLE needs to also set the
2371 % like \smartslanted except unconditionally use \sl. We never want
2388 % We can't just use \exhyphenpenalty, because that only has effect at
2458 % We *must* turn on hyphenation at `-' and `_' in @code.
2464 % We must therefore turn them both off (\tclose does that)
2625 % and it is not used as such in any manual I can find. We need it for
2635 % We print this one point size smaller, since it's intended for
2664 % We use the free feym* fonts from the eurosym package by Henrik
2688 % We set the font at each command, rather than predefining it in
2711 % Hacks for glyphs from the EC fonts similar to \euro. We don't
2724 % We can't distinguish serif/sanserif and italic/slanted, but this
2798 % at the top of the second. We don't want the ragged left on the second.
3081 % line. We do not start a paragraph here because then if the next
3095 % We're going to be starting a paragraph, but we don't want the
3243 % (We will always have one token, because of the test we just made.
3254 % We need the \relax at the end of the \ifnum lines to stop TeX from
3268 % Multiple tokens in the argument. We hope it's a number.
3402 % be just 1. We just use it, whatever it is.
3461 % We use \def instead of \let so that if one of the multitable entries
3553 % \multitableparskip calculation. We used define \multistrut based on
3632 { \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
3664 % We have to swallow the remaining "\_STOP_".
3667 \ifnum\doignorecount = 0 % We have just found the outermost @end.
3692 % We rely on the fact that \parsearg sets \catcode`\ =10.
3727 % We don't want these characters active, ...
3736 % We have this subroutine so that we can handle at least some @value's
4021 % We want to disable all macros so that they are not expanded by \write.
4099 % We can just ignore other control letters.
4165 % We need to get rid of all macros, leaving only the arguments (if present).
4229 % the original text, including any font commands. We write
4254 % But don't do any of this if we're not in vertical mode. We
4260 % We'll have to check whether \lastskip is zero skip. \ifdim is not
4377 % false. We have to make TeX try to read something from the file, so
4407 % We like breaks before the index initials, so insert a bonus.
4568 % Change the page size parameters. We could do this once outside this
4575 % the columns. We compute the gutter based on the line length, so it
4580 % We put the result in a separate register, \doublecolumhsize, so we
4589 % Double the \vsize as well. (We don't need a separate register here,
4662 % definition right away. (We hope \balancecolumns will never be
4671 % the current page. We're now back to normal single-column
4710 % outlines by their "section number". We avoid collisions with chapter
4723 % We do the following ugly conditional instead of the above simple
4927 % as a result of the \message, we just want `@cite' itself. We use
4929 % simply yielding the contents of <toks register>. (We also do this for
5027 % 1) We use \vbox rather than the earlier \line to permit
5218 % updating it with the new noderef stuff. We'll see. --karl, 11aug03.
5346 % \writetocentry if there was no node). We don't want to allow that
5364 % We'll almost certainly start a paragraph next, so don't let that
5387 % We append the current node name (if any) and page number as additional
5392 % We open the .toc file for writing here instead of at @setfilename (or
5418 % writing pdf. These are used in the table of contents. We can't
5478 % redefined for the two-volume lispref. We always output on
5509 % We want a true roman here for the page numbers.
5548 % We'd like to right-justify chapter numbers, but that looks strange
5574 % We use M since it's probably the widest letter.
5632 % We use the same \entry macro as for the index entries.
5740 % Make spacing and below environment symmetrical. We use \parskip here
5876 % We often define two environments, @foo and @smallfoo.
5937 % and narrows the margins. We keep \parskip nonzero in general, since
5956 % We have retained a nonzero parskip for the environment, since we're
6129 % We really want {...\end verbatim} in the body of the macro, but
6155 % We save the uninterpreted tokens, rather than creating a box.
6360 % We are followed by (but not passed) the arguments, if any.
6394 % defun fonts. We use typewriter by default (used to be bold) because:
6430 % We want ()&[] to print specially on the defun line.
6540 % \catcode`\\=\other instead. We'll see whether a problem appears
6650 % We define \csname macarg.\endcsname to be \realbackslash, so
6722 % We need to get `macro parameter char #' into several definitions.
6826 % We need some trickery to remove the optional spaces around the equal
6855 % We don't want such trailing spaces in the node name.
6941 % We know the real title if we have the xref values.
6973 % instead of "[somenode], p.3". We distinguish them by the
7279 % We want to typeset this text as a normal paragraph, even if the
7375 % @image. We use the macros from epsf.tex to support this.
7390 % We will only complain once about lack of epsf.tex.
7445 % etc. We don't actually implement floating yet, we always include the
7463 % We keep a separate counter for each FLOATTYPE, which we reset at each
7478 % We can't be used inside a paragraph.
7500 % We want each FLOATTYPE to be numbered separately (Figure 1,
7636 % \setref calls this to get the XREFLABEL-snt value. We want an @xref
7637 % to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
7653 % (safe) float type for this float. We set \iffloattype to #2.
7688 % This is called on each entry in a list of floats. We're passed the
7690 % aux file. We strip off the -title and look up \XRLABEL-lof, which
8591 % using an old version of TeX, don't do anything. We want the amount of
8593 % \hsize. We call this whenever the paper size is set.
8608 % We also call \setleading{\textleading}, so the caller should define